Resistors
High Voltage
Thick Film Resistors
VRW Series
VRW37 meets requirements of BS / EN / IEC 60065
High working voltage to 10kV in compact size
High ohmic range to 68M
High pulse load capability
ꢀ Robustꢀflameproofꢀcoaꢁngꢀmaterial
ꢀ SurfaceꢀmountꢀZI-formꢀopꢁon
AllꢀPb-freeꢀpartsꢀcomplyꢀwithꢀEUꢀDirecꢁveꢀ2011/65/EUꢀamendedꢀbyꢀ(EU)ꢀ2015/863ꢀ(RoHS3)
Electrical Data
VRW25
0.25
VRW37
0.5
VRW68
1.0
Power rating at 70°C
Resistance range
watts
(Ohms)
100K to 30M
1600
100K to 30M
3500
100K to 68M
10000
Limiting element voltage
Isolation voltage
volts dc or ac peak
volts
ppm/°C
%
700
TCR
200
Resistance Tolerance
Standard Values
≤10M: 1, 5 >10M: 5
1, 5
E24 or E96
112
Thermal Impedance
Ambient temperature range
°C/watt
°C
140
70
-55 to +155°C
Physical Data (Dimensions (mm) & Weight (g)
Type
L
D
Max
f
PCB
mount
Min
bend
Wt.
nom
d
Nom
Max
min
centres
radius
VRW25
VRW37
VRW68
6.2
9.0
2.5
3.7
21
0.6±0.05
0.8±0.05
10.2
12.5
0.6
1.2
0.3
0.5
d
D
L
f
19.6
15.5
5.0
27
0.8±0.05
20.3
1.2
1.15
Construction
Terminations
Material:
Resistive thick film material is applied to high-grade ceramic
rods. Tin-plated steel caps are force fitted and the
termination wires are welded to the caps. The value is
obtained by a helical cut in the film and finally the resistor
body is protected by a cement coating.
Hot tin dipped copper wire
Strength:
The terminations meet the requirements
of IEC 68.2.21
Solderability:
The terminations meet the requirements
of IEC 115-1 Clause 4.17.3.2
Solvent Resistance
The body protection and marking are resistant to all normal
industrial cleaning solvents suitable for printed circuits.
Marking
1% tolerance resistors are colour coded with 5 bands. 2%
and 5% tolerance have 4 bands. IEC62 colours are used.
Flammability
The resistor coating will not burn under any condition of
applied temperature or power overload.
General Note
BI Technologies IRC Welwyn
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronics.com/resistors
© TT Electronics plc
04.21