VO617A
Vishay Semiconductors
www.vishay.com
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
• Operating temperature from - 55 °C to + 110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 80 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
A
C
1
2
4
3
C
E
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• AC adapters
• SMPS
• PLC
• Factory automation
• Game consoles
DESCRIPTION
The 110 °C rated VO617A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which is
optically coupled to
a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
AGENCY APPROVALS
The coupling devices are designed for signal transmission
between two electrically separated circuits.
Safety application model number covering all products in
this data sheet is VO617A. This model number should be
used when consulting safety agency documents.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
operation voltage of 400 VRMS or DC. Specifications subject
to change.
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO EN 60065, EN 60950-1
• CQC GB8898-2001
ORDERING INFORMATION
DIP-4
Option 6
V
O
6
1
7
A
-
#
X
0
#
#
T
7.62 mm
Option 7
10.16 mm
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
> 8 mm
CTR (%)
5 mA
AGENCY
CERTIFIED/PACKAGE
UL, cUL, BSI, FIMKO
DIP-4
50 to 600
40 to 80
63 to 125
VO617A-2
-
100 to 200
VO617A-3
160 to 320
80 to 160
130 to 260
VO617A
VO617A-1
VO617A-4
-
-
DIP-4, 400 mil, option 6
SMD-4, option 7
-
-
-
VO617A-3X006 VO617A-4X006
-
-
-
VO617A-2X007T VO617A-3X007T VO617A-4X007T
-
-
VDE, UL, cUL, BSI, FIMKO 50 to 600
40 to 80
63 to 125
100 to 200
160 to 320
80 to 160
130 to 260
DIP-4, 400 mil, option 6
SMD-4, option 7
-
-
-
-
VO617A-3X016 VO617A-4X016
-
-
VO617A-1X017T VO617A-2X017T VO617A-3X017T VO617A-4X017T VO617A-7X017T VO617A-8X017T
Note
Additional options may be possible, please contact sales office.
•
Rev. 1.8, 18-Apr-13
Document Number: 83430
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000