5秒后页面跳转
捷配首页

Datasheet > 驱动程序和接口 > 外围驱动器> VND5E050AKTR-E
VND5E050AKTR-E PDF预览

VND5E050AKTR-E

更新时间： 2024-10-28 08:19:23
品牌 Logo 应用领域
意法半导体 - STMICROELECTRONICS 外围驱动器驱动程序和接口接口集成电路光电二极管
页数 文件大小 规格书
44页 735K
描述
Double channel high side driver with analog current sense for automotive applications

阅读下载

中文翻译

获取价格

VND5E050AKTR-E 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：SSOP
包装说明：ROHS COMPLIANT, SSOP-24针数：24
Reach Compliance Code：not_compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：6.98
Is Samacsys：N内置保护：TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
驱动器位数：2接口集成电路类型：BUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 代码：R-PDSO-G24JESD-609代码：e3
长度：10.3 mm湿度敏感等级：3
功能数量：1端子数量：24
输出电流流向：SINK最大输出电流：2 A
封装主体材料：PLASTIC/EPOXY封装代码：HSSOP
封装等效代码：SOP24,.4,32封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH峰值回流温度（摄氏度）：260
电源：8/28 V认证状态：Not Qualified
座面最大高度：2.45 mm子类别：Peripheral Drivers
最大供电电压：28 V最小供电电压：4.5 V
标称供电电压：13 V表面贴装：YES
技术：CMOS端子面层：Matte Tin (Sn) - annealed
端子形式：GULL WING端子节距：0.8 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
断开时间：45 µs接通时间：20 µs
宽度：7.5 mmBase Number Matches：1

VND5E050AKTR-E 数据手册

 浏览型号VND5E050AKTR-E的Datasheet PDF文件第2页浏览型号VND5E050AKTR-E的Datasheet PDF文件第3页浏览型号VND5E050AKTR-E的Datasheet PDF文件第4页浏览型号VND5E050AKTR-E的Datasheet PDF文件第5页浏览型号VND5E050AKTR-E的Datasheet PDF文件第6页浏览型号VND5E050AKTR-E的Datasheet PDF文件第7页 
VND5E050AJ-E  
VND5E050AK-E  
Double channel high side driver with analog current sense  
for automotive applications  
Features  
Max transient supply voltage  
Operating voltage range  
VCC  
41 V  
VCC 4.5 to 28 V  
PowerSSO-24  
PowerSSO-12  
Max On-state resistance (per ch.) RON  
50 mΩ  
27 A  
2 µA(1)  
– Reverse battery protected (see Figure 32)  
– Electrostatic discharge protection  
Current limitation (typ)  
Off-state supply current  
ILIMH  
IS  
1. Typical value with all loads connected.  
Applications  
■ General  
■ All types of resistive, inductive and capacitive  
– Inrush current active management by  
power limitation  
loads  
■ Suitable as LED driver  
– Very low standby current  
– 3.0 V CMOS compatible inputs  
– Optimized electromagnetic emissions  
– Very low electromagnetic susceptibility  
– In compliance with the 2002/95/EC  
european directive  
Description  
The VND5E050AJ-E and VND5E050AK-E are  
double channel high-side drivers manufactured in  
the ST proprietary VIPower M0-5 technology and  
housed in the tiny PowerSSO-12 and PowerSSO-  
24 packages. The VND5E050AJ-E and  
VND5E050AK-E are designed to drive 12V  
automotive grounded loads delivering protection,  
diagnostics and easy 3V and 5V CMOS  
– Very low current sense leakage  
■ Diagnostic functions  
– Proportional load current sense  
– High current sense precision for wide  
currents range  
compatible interface with any microcontroller.  
– Current sense disable  
– Off-state open load detection  
The devices integrate advanced protective  
functions such as load current limitation, inrush  
and overload active management by power  
limitation, over-temperature shut-off with  
auto-restart and over-voltage active clamp. A  
dedicated analog current sense pin is associated  
with every output channel in order to provide  
Enhanced diagnostic functions including fast  
detection of overload and short-circuit to ground  
through power limitation indication, over-  
– Output short to V detection  
CC  
– Overload and short to ground (power  
limitation) indication  
– Thermal shutdown indication  
■ Protections  
– Undervoltage shutdown  
– Overvoltage clamp  
temperature indication, short-circuit to Vcc  
diagnosis and on & off state open load detection.  
– Load current limitation  
– Self limiting of fast thermal transients  
– Protection against loss of ground and loss  
The current sensing and diagnostic feedback of  
the whole device can be disabled by pulling the  
CS_DIS pin high to allow sharing of the external  
sense resistor with other similar devices.  
of V  
CC  
– Over temperature shutdown with auto  
restart (thermal shutdown)  
July 2009  
Doc ID 14617 Rev 4  
1/44  
www.st.com  
1
1234567...44

中文翻译

下载PDF

VND5E050AKTR-E 替代型号

型号 品牌 替代类型 描述 数据表
VND5E050ACKTR-E STMICROELECTRONICS

完全替代

 Double channel high-side driver with analog current sense for automotive applications
VND5E050AK-E STMICROELECTRONICS

功能相似

 Double channel high side driver with analog current sense for automotive applications

与VND5E050AKTR-E相关器件

型号 品牌 获取价格 描述 数据表
VND5E050ASO-E STMICROELECTRONICS

获取价格

 		Double channel high-side driver with analog current sense for automotive applications
VND5E050ASOTR-E STMICROELECTRONICS

获取价格

 		Double channel high-side driver with analog current sense for automotive applications
VND5E050J-E STMICROELECTRONICS

获取价格

 		Double channel high side driver for automotive applications
VND5E050J-E_09 STMICROELECTRONICS

获取价格

 		Double channel high side driver for automotive applications
VND5E050JTR-E STMICROELECTRONICS

获取价格

 		Double channel high side driver for automotive applications
VND5E050K-E STMICROELECTRONICS

获取价格

 		Double channel high side driver for automotive applications
VND5E050KTR-E STMICROELECTRONICS

获取价格

 		Double channel high side driver for automotive applications
VND5E050MCJ-E STMICROELECTRONICS

获取价格

 		Double-channel high-side driver with analog current sense for automotive applications
VND5E050MCJTR-E STMICROELECTRONICS

获取价格

 		Double-channel high-side driver with analog current sense for automotive applications
VND5E050MCK-E STMICROELECTRONICS

获取价格

 		Double-channel high-side driver with analog current sense for automotive applications

与VND5E050AKTR-E相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证