VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
Prohibit Surface Arc-Over in High-Voltage Applications
FEATURES
For this Worldwide Patented Technology
• Specialty: high-voltage applications
• MLCC that protects against surface arc-over
• Excellent high-voltage performance
• Higher capacitances and smaller case sizes that
save board space, as compared to standard
high-voltage MLCCs
Available
• Voltage breakdowns as much as twice that of
competitors’ products
• X7R dielectric available with polymer termination for
increase resistance to board flex cracking
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
• DC/DC converters (buck and boost)
• Voltage multipliers for flyback converters
• For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Note
Electrical characteristics at +25 °C unless otherwise specified
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 8.2 nF
Voltage Range: 1000 VDC to 2500 VDC
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 220 pF to 270 nF
Voltage Range: 250 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values ≤ 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Insulating Resistance:
Aging Rate: 1 % maximum per decade
at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less
at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
≤ 250 VDC-rated:
200 % of rated voltage
min. 150 % of rated voltage
500 VDC-rated:
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
1000 VDC-rated:
1500 VDC, 2500 VDC-rated:
150 % of rated voltage
120 % of rated voltage
Revision: 11-Jan-2022
Document Number: 45197
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000