VJ Non-Magnetic Series C0G (NP0)/X7R/X5R Dielectric
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications
FEATURES
• Manufactured with non-magnetic materials
• Speciality: Non-magnetic MLCCs
• Safety screened for magnetic properties
• Wide range of case sizes, voltage ratings and
capacitance values
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
• Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
• Magnetic Resonance Imaging (MRI)
• Medical test and diagnostic equipment
• High Rel medical systems
• High Rel aviation systems
• Laboratory analysis systems
• Navigation and electronic test equipment
• Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
NON-MAGNETIC X7R/X5R
GENERAL SPECIFICATIONS
GENERAL SPECIFICATIONS
Note
Note
Electrical characteristics at + 25 °C unless otherwise specified
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 0.5 pF to 0.056 µF
Voltage Range: 10 VDC to 3000 VDC
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 100 pF to 6.8 µF
Voltage Range:
6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from - 55 °C to + 125 °C
Temperature Coefficient of Capacitance (TCC):
X5R: 15 % from - 55 °C to + 85 °C, with 0 VDC applied
X7R: 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values ≤ 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
≤ 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
≥ 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Aging Rate: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Insulating Resistance:
Insulating Resistance:
At + 25 °C 100 000 M
Ω
min. or 1000
Ω
F whichever is less
F whichever is less
At + 25 °C 100 000 M
At + 125 °C 10 000 M
Ω
min. or 1000
Ω
F whichever is less
At + 125 °C 10 000 M
Ω
min. or 100
Ω
Ω
min. or 100
ΩF whichever is less
Dielectric Strength Test:
Performed per Method 103 of EIA 198-2-E.
Applied test voltages:
Dielectric Strength Test:
Performed per Method 103 of EIA 198-2-E.
Applied test voltages:
≤ 500 VDC-rated:
630 Vdc/1000 VDC-rated:
≤ 500
-rated:
200 % of rated voltage
150 % of rated voltage
VDC
630 Vdc/1000 VDC-rated:
200 % of rated voltage
150 % of rated voltage
1500 Vdc to 3000 VDC-rated: 120 % of rated voltage
1500 Vdc to 3000 VDC-rated: 120 % of rated voltage
Document Number: 45128
Revision: 26-Feb-10
For technical questions, contact: mlcc@vishay.com
www.vishay.com
1