VJ Non-Magnetic Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications
FEATURES
• Specialty: Non-magnetic MLCCs
• Manufactured with non-magnetic materials
• Safety screened for magnetic properties
• C0G (NP0) and X7R/X5R dielectrics offered
• Wide range of case sizes, voltage ratings and
capacitance values
• Allowed assembly methods are conductive epoxy bonding
and IR reflow
• Wet built process
• Reliable Noble Metal Electrode (NME) system
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
• Magnetic Resonance Imaging (MRI)
• Medical test and diagnostic equipment
• High Rel medical systems
• High Rel aviation systems
• Laboratory analysis systems
• Navigation and electronic test equipment
• Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
NON-MAGNETIC X7R/X5R
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 0.5 pF to 56 nF
Voltage Range: 10 VDC to 3000 VDC
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
X5R: 15 % from - 55 °C to + 85 °C, with 0 VDC applied
X7R: 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated:
500 VDC-rated:
630 VDC, 1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated:
500 VDC-rated:
630 VDC, 1000 VDC-rated:
1500 VDC, 3000 VDC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage
250 % of rated voltage
min. 150 % of rated voltage
150 % of rated voltage
120 % of rated voltage
Revision: 01-Feb-12
Document Number: 45128
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000