VJ C0G (NP0)
Vishay Vitramon
Multilayer Ceramic Chip Capacitors
FEATURES
• C0G is an ultra-stable dielectric offering a
Temperature Coefficient of Capacitance (TCC)
of 0 30ppm/ °C.
RoHS
COMPLIANT
• Low Dissipation Factor (DF).
• Ideal for critical timing and tuning applications.
Insulation Resistance (IR):
At + 25 °C and rated voltage 100,000 MΩ minimum or
1000 ΩF, whichever is less.
GENERAL SPECIFICATIONS
NOTE: Electrical characteristics at + 25°C unless otherwise
specified.
At + 125 °C and rated voltage 10,000 MΩ minimum or
100 ΩF, whichever is less.
Capacitance Range: 1.0 pF to 0.056 µF.
Temperature Coefficient of Capacitance (TCC):
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current does
not exceed 50mA
0
30ppm/ °C from - 55 °C to + 125 °C.
Dissipation Factor (DF):
0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF.
0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF.
≤ 100V DC : DWV at 250 % of rated voltage.
ORDERING INFORMATION
VJ0805
A
102
K
X
A
A
T
### 3)
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC
VOLTAGE
RATING 1)
MARKING
PACKAGING PROCESS
CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
A = C0G (NP0) Expressed in
C = 0.25 pF
X = Ni barrier X = 25V
A = Unmarked
M = Marked
picofarads (pF). D = 0.5 pF
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
100% tin
plated.
A = 50V
F = 1 %
G = 2 %
J = 5 %
K = 10 %
NOTE:
C, D < 10 pF
F, G, J, K ≥ 10 pF
NOTE: Marking
is only available
for 0805 and
1206
B = 100V
F = AgPd
T = 7” reel / plastic tape
C = 7” reel / paper tape
102 = 1000 pF
1R8 = 1.8 pF
I = 7” reel / flamed paper tape
R = 11 1/4” reel / plastic tape
P = 11 1/4” reel / paper tape
O = 11 1/4” reel / flamed paper tape
NOTE: “I” and “O” is used for
“F” termination
Note
1. DC voltage rating should not be exceeded in application
3. Process Code may be added with up to three digits, used to control non-standard products and/or special requirements
Document Number 45002
Revision 30-Feb-05
For technical questions contact MLCC@vishay.com
www.vishay.com
5