VIPERGAN65
Datasheet
Advanced quasi-resonant offline high voltage converter with E-mode GaN HEMT
Features
•
•
•
•
Quasi-resonant (QR) flyback controller
650 V E-mode power GaN transistor
Embedded sense FET
Dynamic blanking time and adjustable valley synchronization delay functions, to
maximize efficiency at any input line and load condition
•
•
Valley-lock to ensure constant valley skipping
Advanced power management for less than 30 mW standby power consumption
with adaptive burst-mode
•
•
•
•
•
•
Output OVP protection
Input voltage feed-forward compensation for mains independent OPP variation
Brown-in and brown-out protection
Input OVP protection
Embedded thermal shutdown
Frequency jitter for EMI suppression
Product status link
Application
VIPERGAN65
•
•
•
High efficiency power adapters
Fast battery chargers
Product label
Auxiliary power supply for appliances, industrial, consumers, lighting
Description
The VIPERGAN65 is a high voltage converter, designed for medium power quasi-
resonant ZVS (Zero Voltage Switching at switch turn-on) flyback converters, capable
to provide an output power up to 65 W in wide range.
Figure 1. Typical application
It integrates a complete set of features that provide an extremely flexible and
easy to use chip and helps to design a highly efficient offline power supply. The
ZVS quasi-resonant operation with the dynamic blanking time feature and the
valley synchronization function, that turns on the power switch always at the valley
of the drain resonance, reduces the switching losses and maximizes the overall
efficiency at any input line and load condition. The advanced power management
with the low quiescent helps to achieve low stand-by consumptions. The feed-forward
compensation minimizes the maximum output peak power variation over the entire
input voltage range.
In addition to the above functions, the device offers protection features that
considerably increase end-product’s safety and reliability: the output overvoltage
protection, the overtemperature protection (OTP), the overload protection (OLP), the
brown-in/out protection, that set the input voltage level to power on and power off
the converter and the input overvoltage protection (iOVP), that protects the system
in case of an abnormal increase of the input line. All the protections are auto-restart
mode.
DS14005 - Rev 2 - August 2022
www.st.com
For further information contact your local STMicroelectronics sales office.