PRELIMINARY
VTM
V048K480T006
TM
V•I Chip – VTM
K indicates BGA configuration. For other
mounting options see Part Numbering below.
Voltage Transformation Module
• 48 V to 48 V V•I Chip Converter
• 125°C operation
• 6.3 A (9.4 A for 1 ms)
• 1 µs transient response
• 3.5 million hours MTBF
• Typical efficiency 96%
• No output filtering required
©
• High density – 1218 W/in3
• Small footprint – 280 W/in2
• Low weight – 0.5 oz (14 g)
• Pick & Place / SMD
Vf = 26 - 55 V
VOUT = 26.0 - 55.0 V
IOUT = 6.3 A
• Surface mount BGA or J-Lead
packages
K = 1
Actual size
ROUT = 200.0 mΩ max
Product Description
Absolute Maximum Ratings
Parameter
Values
-1.0 to 60.0
100
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
A
Notes
The V048K480T006 V•I Chip Voltage Transformation
Module (VTM) excels at speed, density and efficiency to
meet the demands of advanced power applications
while providing isolation from input to output. It
achieves a response time of less than 1 µs and delivers
up to 6.3 A in a volume of less than 0.25 in3 with
unprecedented efficiency. It may be paralleled to deliver
higher power levels at an output voltage settable from
26.0 to 55.0 Vdc.
+In to -In
+In to -In
For 100 ms
PC to -In
-0.3 to 7.0
-0.3 to 19.0
-0.1 to 60.0
2,250
VC to -In
+Out to -Out
Isolation voltage
Output current
Peak output current
Output power
Peak output power
Case temperature
Input to Output
Continuous
For 1 ms
6.3
9.4
A
The VTM V048K480T006’s nominal output voltage is
48 Vdc from a 48 Vdc input Factorized Bus, Vf, and is
controllable from 26.0 to 55.0 Vdc at no load, and from
24.8 to 53.9 Vdc at full load, over a Vf input range of
26 to 55 Vdc. It can be operated either open- or closed-
loop depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
337
W
Continuous
For 1 ms
505
W
208
°C
During reflow
-40 to 125
-55 to 125
°C
°C
T - Grade
M - Grade
Operating junction temperature(1)
-40 to 150
-65 to 150
°C
°C
T - Grade
M - Grade
Storage temperature
K =1
, for applications requiring an isolated output
voltage with high efficiency. Closing the loop back to an
input Pre-Regulation Module (PRM) or DC-DC converter
enables tight load regulation.
Note:
(1) The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by a shutdown comparator.
The 48 V VTM achieves a power density of 1218 W/in3 in
a V•I Chip package compatible with standard pick-and-
place and surface mount assembly processes. The
V•I Chip BGA package supports in-board mounting with
a low profile of 0.16" (4 mm) over the board. A J-lead
package option supports on-board surface mounting
with a profile of only 0.25" (6 mm) over the board. The
VTM’s fast dynamic response and low noise eliminate the
need for bulk capacitance at the load, substantially
increasing system density while improving reliability and
decreasing cost.
Part Numbering
V
048
K
480 T
006
Voltage
Transformation
Module
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Input Voltage
Designator
Configuration Options
Product Grade Temperatures (°C)
Grade
T
M
Storage Operating
-40 to150 -40 to125
-65 to150 -55 to125
F
= On-board (Figure 15)
K = In-board (Figure 14)
vicorpower.com
800-735-6200
V•I Chip Voltage Transformation Module
V048K480T006
Rev. 1.0
Page 1 of 15