Datasheet > MCR10EZPF3013

MCR10EZPF3013

更新时间： 2023-12-18 00:00:00

品牌	Logo	应用领域
VICOR		/
页数	文件大小	规格书
14页	2656K
描述
DC-DC Converter Evaluation Board

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MCR10EZPF3013 数据手册

USER GUIDE | UG:301

PI31xx-xx-EVAL1 Cool-Power^®ZVS Isolated

DC-DC Converter Evaluation Board

Chris Swartz

Principal Applications Engineer

May 2013

Contents

Page

Introduction

The PI31xx-xx-EVAL1 evaluation board allows the user to test the basic operating

principles of the PI31xx series of high density DC-DC power converters and experience

the performance and value of this solution compared to alternate conventional

solutions. Each evaluation board is populated with the components that could be used

in a ﬁnal design. It is not designed or intended to be used in end product applications.

Please read this document prior to the connection of test equipment and refer to the

product datasheet for device speciﬁcations, descriptions and characteristics. Remember

to follow good lab safety practices and use safety glasses at all times.

Introduction

Product Description

Board Connections

Thermal Considerations

The PI31xx-xx-EVAL1 is conﬁgured to support one single input and one single output.

Each board oﬀers pin strap options for trimming the output voltage up and down,

turning the converter on and oﬀ and adding EMI system “Y” capacitors. Additional

parts are included to compensate for line impedance associated with long leads from

the bench power supply to the converter. Additional component footprints are made

available to allow the user to test diﬀerent design conﬁgurations that may be required

to meet their end needs. Kelvin type test points are included to allow for easy and

convenient connections of testing instruments for evaluation of eﬃciency, line/load

regulation and transient response. A low impedance oscilloscope connection using a

Johnson jack is included for ripple measurement and evaluation of the output voltage

during transient events. Each demo board is equipped with a heatsink to allow high

power operation with a small amount of air ﬂow and to allow operation of the board

over various temperature extremes.

Max I/O Ratings

Schematic

BOMs

Test Setup

PCB Artwork

Mechanical Outline

Ordering Information

Figure 1.

PI31xx-xx-EVAL1

Evaluation Board

UG:301

vicorpower.com

Applications Engineering: 800 927.9474

Page 1

12 3 4 5 6 7...14

下载PDF

与MCR10EZPF3013相关器件

型号	品牌	描述	获取价格	数据表
MCR10EZPF3090	ROHM	RES SMD 309 OHM 1% 1/8W 0805	获取价格
MCR10EZPF3091	ROHM	RES SMD 3.09K OHM 1% 1/8W 0805	获取价格
MCR10EZPF3093	ROHM	RES SMD 309K OHM 1% 1/8W 0805	获取价格
MCR10EZPF30R0	ROHM	Fixed Resistor, Metal Glaze/thick Film, 0.125W, 30ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surfac	获取价格
MCR10EZPF30R1	ROHM	RES SMD 30.1 OHM 1% 1/8W 0805	获取价格
MCR10EZPF30R9	ROHM	RES SMD 30.9 OHM 1% 1/8W 0805	获取价格