5秒后页面跳转
I048C080T024P1 PDF预览

I048C080T024P1

更新时间: 2022-12-22 23:51:33
品牌 Logo 应用领域
VICOR 转换器
页数 文件大小 规格书
8页 233K
描述
Intermediate Bus Converters Quarter-Brick, 48 Vin Family 1.5 to 48 Vdc Bus Voltages; 100 A - 600 W Output

I048C080T024P1 数据手册

 浏览型号I048C080T024P1的Datasheet PDF文件第2页浏览型号I048C080T024P1的Datasheet PDF文件第3页浏览型号I048C080T024P1的Datasheet PDF文件第4页浏览型号I048C080T024P1的Datasheet PDF文件第5页浏览型号I048C080T024P1的Datasheet PDF文件第6页浏览型号I048C080T024P1的Datasheet PDF文件第7页 
PRELIMINARY  
IBC  
TM  
V•I Chip –  
VIC-in-a-Brick  
• Up to 600 W  
Intermediate Bus Converters  
Quarter-Brick, 48 Vin Family  
1.5 to 48 Vdc Bus Voltages; 100 A - 600 W Output  
• 94% Efficiency @ 3 Vdc  
• 600 W @ 55ºC, 400 LFM  
• 125°C operating temperature  
• 400 W/in3 power density  
• 38-55 Vdc input range  
• 100 V input surge for 100 ms  
• SAC topology  
©
• Low noise ZCS/ZVS architecture  
• 3.5 MHz switching frequency  
• Fast dynamic response  
• 2,250 Vdc basic insulation  
• Parallelable, with faul  
tolerance  
Product Description  
Absolute Maximum Ratings  
These "VIC-in-a-Brick" Intermediate Bus Converter (IBC)  
modules use Vicors V•I Chip Bus Converter Modules (BCM)  
to achieve the highest performance for Intermediate Bus  
Architecture applications. Operating from a 38 – 55 Vdc  
input, ten different fixed ratio outputs are available from 3 to  
48 Vdc. You can choose the intermediate bus voltage that is  
optimal for your system and load requirements.  
Parameter  
Values  
Unit  
Notes  
+In to -In voltage  
Continuous  
-1.0 to 60  
100  
Vdc  
Vdc  
Vdc  
Surge  
<100ms  
ON/OFF to -In voltage  
Isolation voltage  
Input to output  
In/Out to heat sink  
-0.3 to 7.0  
Basic insulation  
These quarter-bricks are available with a single BCM,  
rated up to 300 W or 70 A, or with dual BCMs, capable  
of 600 W or 100 A. Dual output pins are used for output  
currents over 50 A.  
2,250  
1,500  
Vdc  
Vdc  
°C  
Operating temperature  
Pin soldering temperature  
Wave  
-40 to 125  
Junction  
Utilizing breakthrough Sine Amplitude Converter (SAC)  
technology, BCMs offer the highest efficiency, lowest noise,  
fastest transient response and highest power density. And full  
load power is available at 55ºC with only 200 LFM of air  
for single BCM versions and 400 LFM for dual BCM  
versions, without a heat sink.  
500 (260)  
750 (390)  
°F (°C)  
°F (°C)  
<5 sec  
<7 sec  
Hand  
Thermal Resistance and Capacity  
Parameter  
Typ  
13.3  
11.7  
6.1  
Unit  
VIC to ambient; 0 LFM (Single BCM)  
VIC to ambient; 0 LFM (Dual BCM)  
VIC to ambient; 200 LFM (Single BCM)  
VIC to ambient; 200 LFM (Dual BCM)  
Thermal capacity (Single BCM)  
Thermal capacity (Dual BCM)  
°C/W  
°C/W  
°C/W  
°C/W  
Ws/°C  
Ws/°C  
4.3  
14.3  
22.8  
vicorpower.com  
800-735-6200  
V•I Chip Intermediate Bus Converter  
Rev. 1.5  
Page 1 of 8  

与I048C080T024P1相关器件

型号 品牌 描述 获取价格 数据表
I048C080T030P1 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family

获取价格

I048C080T040P1 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family

获取价格

I048C080T048P2 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family 1.5 to 48 Vdc Bus Voltages; 100 A

获取价格

I048C080T060P2 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family

获取价格

I048C096T024P1 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family

获取价格

I048C096T048P1 VICOR Intermediate Bus Converters Quarter-Brick, 48 Vin Family

获取价格