5秒后页面跳转
19-130040 PDF预览

19-130040

更新时间: 2022-12-09 00:31:04
品牌 Logo 应用领域
VICOR /
页数 文件大小 规格书
1页 152K
描述
ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies

19-130040 数据手册

  
ConverterPAC Description  
ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies. There are  
currently 12 ConverterPACs available for use. Most ConverterPACs of the same length are interchange-  
able within a MegaPAC and between different AC input MegaPAC chassis. They can be added, moved,  
or changed as necessary. The type of ConverterPAC used in this slot is a BatPAC.  
BatPAC (B)  
The BatPAC output assembly consists of a 1st Gen VI-200 BatMod current source that  
converts the high voltage bus to the desired regulated output voltage. The convert-  
er is fused with a PC-Tron, DC-rated, fast-acting fuse. The BatPAC is a 200  
Watts programmable current source that can be configured as a battery charg-  
er. Maximum current and voltage settings are controlled using potentiometers  
that come as a standard feature, or through Trim pin access as an option.  
BatPACs are available for 12V, 24V and 48V battery systems. Multiple  
BatPACs can be paralleled in a driver-booster configuration to provide more  
power. BatPACs can be ordered with voltage limits, current limits, both or nei-  
ther. Please also note that newer BatPACs have new outputs studs that are 1/8"  
longer to allow for multiple lugs. They are fully compatible with the original flanged nut  
ConverterPACs for use in parallel arrays. For further technical information about ConverterPACs, contact  
Applications Engineering at 1-800-927-9474.  
BatPAC Specifications  
BatPACs come standard with trimpots for setting the maximum voltage or current settings. The minimum and  
maximum voltage and current settings are listed in the table below.  
Nominal BatPAC  
Voltage  
Voltage  
Current  
Minimum  
Maximum  
Minimum  
Maximum  
12  
24  
48  
11.3  
22.5  
45  
16.5  
33  
0
0
0
14.5  
7.3  
66  
3.6  
BatPAC Output and Connector Pin Identification  
Output connector kits (optional) for  
your MegaPAC supply are available  
for purchase from Westcor:  
J2 (BATPAC REMOTE INTERFACE)  
+ V0UT  
CURRENT LIMIT ADJUST  
VOLTAGE LIMIT ADJUST  
4
3
2
1
CURRENT LIMIT ADJUST  
VOLTAGE LIMIT ADJUST  
CURRENT MONITOR  
- VOUT  
Part Number  
- VOUT  
Single phase input  
Three phase input  
19-130040  
19-130041  
MATING HDWR:  
HOUSING- MOLEX P/N: 39-01-0043  
TERMINALS- MOLEX P/N: 30-00-0031  
CRIMP TOOL MOLEX P/N: 57005-5000  
J3-PIN1  
For more details about any Westcor products, contact the factory at 1-800-735-6200 or go to our website at  
www.vicorpower.com  
1/2005  

与19-130040相关器件

型号 品牌 描述 获取价格 数据表
19-130041 VICOR ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies

获取价格

19-130042 VICOR ConverterPACs are the family of slide-in output assemblies used in MegaPAC power supplies

获取价格

191-3005-020 AMPHENOL Wire And Cable

获取价格

191-3005-068 AMPHENOL Wire And Cable, 68 Conductor(s), 30AWG, 150V, Flat Cable

获取价格

191-3005-080 AMPHENOL Wire And Cable

获取价格

19130-05P COOPER Analog Circuit

获取价格