VD6283TX
Datasheet
Hybrid filter multispectral sensor with light flicker engine
Features
•
•
•
Miniature optical module
–
–
–
1.83 x 1.0 x 0.55 mm
Optical BGA, 6-balls, reflowable package
Operates with cover glass on top
ALS operation with 6 independent channels
–
–
–
Advanced hybrid filters with high photocount response
Parallel sensing of all channels: red, green, blue, IR, clear, and visible
Operating conditions: 7 mLux to 30 kLux (green channel)
Light flicker extraction
–
–
Innovative readout architecture to extract AC light flicker signal
From 100 Hz to 2 kHz frequency detection, sine or square wave
•
•
•
•
•
Software driver provided by ST
I2C interface up to 1 Mbit/s (Fast mode plus)
1.8 V power supply
Low-power consumption
Operating temperature -30 to 85 °C
Applications
•
True tone color-sensing IC for screen brightness adjustment, and white balance
color assistance
Order code
Product version
•
•
Lux and CCT measurement
Red, green, blue,
visible, IR, and
clear
Light frequency extraction for flicker correction assistance
VD6283TX45/1
Description
The VD6283 (1.83 x 1.0 x 0.55 mm) is ST's new color sensor with advanced light
flicker extraction. Light measurement is fast and accurate thanks to an individual
ADC and a readout for each color channel. The VD6283 uses hybrid color filters with
precise responses allowing accurate computation of the correlated color temperature
(CCT) and Lux information. The VD6283 can be used for display brightness
management or scene light correction.
With a patented architecture and a high-performance photodiode design, the VD6283
can extract light flickering frequencies to avoid “banding effects” on videos, or check
that they are safe for human eye. Additionally, the VD6283 is the only sensor able to
extract different light flicker waveforms from 100 Hz and 2 kHz, including LED square
signals, that can run flicker operations simultaneously with ALS operations.
DS13735 - Rev 1 - May 2021
For further information contact your local STMicroelectronics sales office.
www.st.com