3.3V LOW PROFILE SMD VCXO
MODEL: VCSAXT SERIES
OPTIONS
• Many Stability/Pullability Options
• -40ºC ~ +85ºC Option ('R' Version)
FEATURES
• 3.3V Operation
• HCMOS Output
• Enable/Disable
• Tape and Reel (2,000 pcs. STD)
Learn more about:
Part Marking Identification
• PART NUMBER SELECTIONLearn More - Internet Required
Tape and Reel Specification
Model
Frequency
Operating
Internet required
Frequency
Stability1
±25PPM
±25PPM
±50PPM
±50PPM
±25PPM
±25PPM
±50PPM
±50PPM
Frequency
Part Number
Number
Pullability Temperature
±50PPM -10 ~ +70(ºC)
1.000~80.000
VCS12AXT
VCS12AXTR3
VCS15AXT
VCS15AXTR
421-Frequency-xxxxx
437-Frequency-xxxxx
422-Frequency-xxxxx
439-Frequency-xxxxx
-40 ~ +85(ºC) 1.000~80.000
±50PPM
1.000~80.000
1.000~80.000
1.000~80.000
1.000~80.000
1.000~80.000
±50PPM -10 ~ +70(ºC)
-40 ~ +85(ºC)
-10 ~ +70(ºC)
-40 ~ +85(ºC)
-10 ~ +70(ºC)
±50PPM
±100PPM
±100PPM
±100PPM
±100PPM
423-Frequency-xxxxx VCS22AXT
443-Frequency-xxxxx
424-Frequency-xxxxx
445-Frequency-xxxxx
425-Frequency-xxxxx
441-Frequency-xxxxx
VCS22AXTR3
VCS25AXT
VCS25AXTR
VCS20AXT
VCS20AXTR
-40 ~ +85(ºC) 1.000~80.000
1.000~80.000
1.000~80.000
-10 ~ +70(ºC)
-40 ~ +85(ºC)
±100PPM ±100PPM
±100PPM ±100PPM
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (FO)
MAX (unless otherwise noted)
1.000 ~ 80.0004 MHz
Storage Temperature Range (TSTG)
-40ºC ~ +85ºC
3.3V ± 10%
1.65V ± 1.5V
Supply Voltage
Control Voltage
Input Current
(VDD)
(VC)
(IDD)
1.000 ~ 30.000 MHz
30.000+ ~ 45.000 MHz
15mA
25mA
45.000+ ~ 80.000 MHz
50mA
Output Symmetry (50% VDD)
Rise Time (10% ~ 90% VDD) (TR)
Fall Time (90% ~ 10% VDD) (TF)
40% ~ 60%
5nS
5nS
Output Voltage
(VOL)
(VOH)
(IOL)
(IOH)
(HCMOS)
(TS)
10% VDD
90% VDD Min
4.0mA Min
-1.0mA Min
15pF
Output Current
Output Load
Start-up Time
Enable/Disable Time 2
Frequency Linearity
Modulation Bandwidth
10mS
150nS
±10%
20 kHz
1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,
shock, vibration, and Vc = 1.65V.
2 An internal pullup resistor from pin 2 to pin 6 allows active output if pin 2 is left open.
3 Available on an individual inquiry basis.
4 Custom specifications from 45.000 to 80.000 MHz available on an individual inquiry basis.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3) to
minimize power supply line noise.
All dimensions are in millimeters.
Note: An alternate pin connection with E/D on pin #5 is available.
All specifications subject to change without notice. Rev. 6/1/04
• ENABLE / DISABLE FUNCTION
INH (Pin 2)
OPEN 2
OUTPUT (Pin 4)
ACTIVE
'1' Level VIH ≥ 70% VDD
'0' Level VIL ≤ 30% VDD
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com
76
© 2004 FOX ELECTRONICS