TPS7H4010-SEP
SNVSBLT0P–SN7OHVE4M0B1E0R-S2E02P0
SNVSBL0 – NOVEMBER 2020
www.ti.com
TPS7H4010-SEP Radiation Hardened 3.5-V to 32-V, 6-A Synchronous
Step-Down Voltage Converter in Space Enhanced Plastic
1 Features
2 Applications
•
Radiation Hardened
•
Space satellite point of load supply for FPGAs,
microcontrollers, data converters and ASICs
Communications payload
Command and data handling
Optical imaging payload
Radar imaging payload
Laser communications payload
Navigations payload
Scientific exploration payload
– SEL, SEB, and SEGR immune up to
LET = 43 MeV-cm2/mg
– SET and SEFI characterized up to
LET = 43 MeV-cm2/mg
– TID assured for every wafer lot up to
20 krad(Si)
– TID characterized up to 30 krad(Si)
Space Enhanced Plastic
•
•
•
•
•
•
•
•
– Controlled baseline
3 Description
– Au bondwire and NiPdAu lead finish
– Enhanced mold compound for low outgassing
– One fabrication, assembly and test site
– Extended product life cycle
– Extended product change notification
– Product traceability
Wide voltage conversion range:
– tON-MIN = 60 ns (typical)
– tOFF-MIN = 70 ns (typical)
Low MOSFET ON-resistance:
– RDS_ON_HS = 53 mΩ (typical)
– RDS_ON_LS = 31 mΩ (typical)
Adjustable frequency range: 350 kHz to 2.2 MHz
Synchronizable to external clock
Internal compensation
The TPS7H4010-SEP is an easy-to-use synchronous
step-down DC/DC converter capable of driving up to 6
A of load current from a supply voltage ranging from
3.5 V to 32 V. The TPS7H4010-SEP provides
exceptional efficiency and output accuracy in a very
small solution size. Peak current-mode control is
employed. Additional features such as adjustable
switching frequency, synchronization to an external
clock, FPWM option, power-good flag, precision
enable, adjustable soft start, and tracking provide both
flexible and easy-to-use solutions for a wide range of
applications. Automatic frequency foldback at light
load and optional external bias improve efficiency
over the entire load range. The device requires few
external components and has a pinout designed for
simple PCB layout with optimal EMI and thermal
performance. Protection features include thermal
shutdown, input undervoltage lockout, cycle-by-cycle
current limiting, and hiccup short-circuit protection.
•
•
•
•
•
•
•
•
•
•
•
Power-good flag
Precision enable to program system UVLO
Fixed or adjustable soft-start time
Cycle-by-cycle current limiting
Short-circuit protection with hiccup mode
Thermal shutdown protection
Device Information
PART NUMBER(1)
GRADE
PACKAGE
QFN (30)
6.00 mm × 4.00 mm
Mass = 57.2 mg(2)
20 krad(Si)
RLAT
TPS7H4010MRNPTSEP
L
VIN
VOUT
SW
PVIN
EN
CBOOT
COUT
CIN
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
CBOOT
BIAS
RT
PGND
PGOOD
(2) Mass is accurate to ±10%.
SS/TRK
RFBT
SYNC/
MODE
FB
RFBB
VCC
CVCC
AGND
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: TPS7H4010-SEP
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1