DRV8842
www.ti.com
SLVSAB8D –MAY 2010–REVISED JANUARY 2012
DC MOTOR DRIVER IC
Check for Samples: DRV8842
1
FEATURES
2
•
Single H-Bridge Current-Control Motor Driver
•
Thermally Enhanced Surface Mount Package
–
–
–
Drives One DC Motor, One Coil of a Stepper
Motor, or Other Actuators
APPLICATIONS
•
•
•
•
•
•
Printers
Five-Bit Winding Current Control Allows Up
to 32 Current Levels
Scanners
Low MOSFET On-Resistance
Office Automation Machines
Gaming Machines
Factory Automation
Robotics
•
•
•
•
5-A Maximum Drive Current at 24 V, 25°C
Built-In 3.3-V Reference Output
Industry-Standard PWM Control Interface
8.2-V to 45-V Operating Supply Voltage Range
DESCRIPTION
The DRV8842 provides an integrated motor driver solution for printers, scanners, and other automated
equipment applications. The device has one H-bridge driver, and is intended to drive one DC motor, one coil of a
stepper motor, or other loads. The output driver block consists of N-channel power MOSFET’s configured as an
H-bridge. The DRV8842 can supply up to 5-A peak or 3.5-A RMS output current (with proper heatsinking at 24 V
and 25°C).
Separate inputs to independently control each half of the H-bridge are provided.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage
lockout and overtemperature.
TheDRV8842 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
ORDERING INFORMATION(1)
ORDERABLE PART
NUMBER
TOP-SIDE
MARKING
TA
PACKAGE(2)
–40°C to 85°C
PowerPAD™ (HTSSOP) - PWP
Reel of 2000
DRV8842PWPR
8842
(1) For the most current packaging and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2012, Texas Instruments Incorporated