5秒后页面跳转
V62/06615-01XE PDF预览

V62/06615-01XE

更新时间: 2024-11-18 11:58:23
品牌 Logo 应用领域
德州仪器 - TI 线路驱动器或接收器驱动程序和接口接口集成电路光电二极管信息通信管理
页数 文件大小 规格书
21页 617K
描述
EXTENDED COMMON-MODE RS-485 TRANSCEIVERS

V62/06615-01XE 技术参数

是否无铅:不含铅是否Rohs认证:符合
生命周期:Active零件包装代码:SOIC
包装说明:GREEN, PLASTIC, SOIC-8针数:8
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:5.42Is Samacsys:N
差分输出:YES驱动器位数:1
高电平输入电流最大值:0.0001 A输入特性:DIFFERENTIAL SCHMITT TRIGGER
接口集成电路类型:LINE TRANSCEIVER接口标准:EIA-485-A; TIA-485-A
JESD-30 代码:R-PDSO-G8JESD-609代码:e4
长度:4.9 mm湿度敏感等级:1
功能数量:1端子数量:8
最高工作温度:125 °C最低工作温度:-55 °C
最小输出摆幅:1.8 V输出特性:3-STATE
最大输出低电流:0.008 A输出极性:TRUE
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOP8,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
电源:5 V认证状态:Not Qualified
最大接收延迟:70 ns接收器位数:1
座面最大高度:1.75 mm子类别:Line Driver or Receivers
最大压摆率:15 mA最大供电电压:5.5 V
最小供电电压:4.5 V标称供电电压:5 V
电源电压1-最大:5.5 V电源电压1-分钟:4.5 V
电源电压1-Nom:5 V表面贴装:YES
技术:BICMOS温度等级:MILITARY
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED最大传输延迟:60 ns
宽度:3.9 mmBase Number Matches:1

V62/06615-01XE 数据手册

 浏览型号V62/06615-01XE的Datasheet PDF文件第2页浏览型号V62/06615-01XE的Datasheet PDF文件第3页浏览型号V62/06615-01XE的Datasheet PDF文件第4页浏览型号V62/06615-01XE的Datasheet PDF文件第5页浏览型号V62/06615-01XE的Datasheet PDF文件第6页浏览型号V62/06615-01XE的Datasheet PDF文件第7页 
www.ti.com  
SGLS321 − DECEMBER 2005  
D
Low Standby Supply Current 1.5-µA Max  
More Than 100 mV Receiver Hysteresis  
FEATURES  
D
D
Controlled Baseline  
Component qualification in accordance with JEDEC and industry  
standards to ensure reliable operation over an extended temperature  
range. This includes, but is not limited to, Highly Accelerated Stress  
Test (HAST) or biased 85/85, temperature cycle, autoclave or  
unbiased HAST, electromigration, bond intermetallic life, and mold  
compound life. Such qualification testing should not be viewed as  
justifying use of this component beyond specified performance and  
environmental limits.  
− One Assembly/Test Site, One Fabrication  
Site  
D
D
Extended Temperature Performance of −55°C  
to 125°C  
Enhanced Diminishing Manufacturing  
Sources (DMS) Support  
D
D
D
D
Enhanced Product-Change Notification  
APPLICATIONS  
Qualification Pedigree  
D
Long Cable Solutions  
Common-Mode Voltage Range (−20 V to 25 V)  
More Than Doubles TIA/EIA-485 Requirement  
Factory Automation  
Security Networks  
Building HVAC  
Receiver Equalization Extends Cable Length,  
Signaling Rate (HVD23, HVD24)  
D
Severe Electrical Environments  
D
D
D
Reduced Unit-Load for up to 256 Nodes  
Bus I/O Protection to Over 16-kV HBM  
Electrical Power Inverters  
Industrial Drives  
Avionics  
Failsafe Receiver for Open-Circuit,  
Short-Circuit and Idle-Bus Conditions  
DESCRIPTION  
The SN65HVD21M offers performance exceeding typical RS−485 devices. In addition to meeting all  
requirements of the TIA/EIA−485−A standard, the HVD2x family operates over an extended range of  
common-mode voltage, and has features such as high ESD protection, wide receiver hysteresis, and failsafe  
operation. This family of devices is ideally suited for long-cable networks, and other applications where the  
environment is too harsh for ordinary transceivers.  
The SN65HVD21M is designed for bidirectional data transmission on multipoint twisted-pair cables. Example  
applications are digital motor controllers, remote sensors and terminals, industrial process control, security  
stations, and environmental control systems.  
The SN65HVD21M combines a 3-state differential driver and a differential receiver, which operates from a  
single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected  
internally to form a differential bus port that offers minimum loading to the bus. This port features an extended  
common-mode voltage range making the device suitable for multipoint applications over long cable runs.  
The SN65HVD21M allows up to 256 connected nodes at moderate data rates (up to 5 Mbps). The driver output slew  
rate is controlled to provide reliable switching with shaped transitions which reduce high-frequency noise emissions.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments  
semiconductor products and disclaimers thereto appears at the end of this data sheet.  
ꢋꢑ ꢏ ꢆꢖ ꢎ ꢍꢕ ꢏꢁ ꢆ ꢔꢍꢔ ꢗꢘ ꢙꢚ ꢛ ꢜꢝ ꢞꢗꢚꢘ ꢗꢟ ꢠꢡ ꢛ ꢛ ꢢꢘꢞ ꢝꢟ ꢚꢙ ꢣꢡꢤ ꢥꢗꢠ ꢝꢞꢗ ꢚꢘ ꢦꢝ ꢞꢢꢧ ꢋꢛ ꢚꢦꢡ ꢠꢞꢟ  
ꢠ ꢚꢘ ꢙꢚꢛ ꢜ ꢞꢚ ꢟ ꢣꢢ ꢠ ꢗ ꢙꢗ ꢠ ꢝ ꢞꢗ ꢚꢘꢟ ꢣ ꢢꢛ ꢞꢨꢢ ꢞꢢ ꢛ ꢜꢟ ꢚꢙ ꢍꢢꢩ ꢝꢟ ꢕꢘꢟ ꢞꢛ ꢡꢜ ꢢꢘꢞ ꢟ ꢟꢞ ꢝꢘꢦ ꢝꢛ ꢦ ꢪ ꢝꢛ ꢛ ꢝ ꢘꢞꢫꢧ  
ꢋꢛ ꢚ ꢦꢡꢠ ꢞ ꢗꢚ ꢘ ꢣꢛ ꢚ ꢠ ꢢ ꢟ ꢟ ꢗꢘ ꢬ ꢦꢚ ꢢ ꢟ ꢘꢚꢞ ꢘꢢ ꢠꢢ ꢟꢟ ꢝꢛ ꢗꢥ ꢫ ꢗꢘꢠ ꢥꢡꢦ ꢢ ꢞꢢ ꢟꢞꢗ ꢘꢬ ꢚꢙ ꢝꢥ ꢥ ꢣꢝ ꢛ ꢝꢜ ꢢꢞꢢ ꢛ ꢟꢧ  
Copyright 2005, Texas Instruments Incorporated  

V62/06615-01XE 替代型号

型号 品牌 替代类型 描述 数据表
SN65HVD21MDREPG4 TI

完全替代

EXTENDED COMMON-MODE RS-485 TRANSCEIVERS
SN65HVD21MDREP TI

完全替代

EXTENDED COMMON-MODE RS-485 TRANSCEIVERS
SN65HVD1793D TI

功能相似

70-V Fault-Protected RS-485 Transceivers

与V62/06615-01XE相关器件

型号 品牌 获取价格 描述 数据表
V62/06616-01XE TI

获取价格

具有加电时序的双路输出低压降稳压器(增强型产品)

| PWP | 24 |
V62/06617-01XE TI

获取价格

DUAL-OUTPUT LOW-DROPOUT LINEAR REGULATOR
V62/06618-01 TI

获取价格

0.61A SWITCHING REGULATOR, 600kHz SWITCHING FREQ-MAX, PDSO8, PLASTIC, MSOP-8
V62/06619-01XE TI

获取价格

Digital Signal Processors
V62/06619-03XE TI

获取价格

Digital Signal Processors
V62/06620-01XE TI

获取价格

QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE
V62/06621-01XE TI

获取价格

SINGLE SCHMITT-TRIGGER BUFFER
V62/06621-01YE TI

获取价格

SINGLE SCHMITT-TRIGGER BUFFER
V62/06622-01XE TI

获取价格

HiRel Enhanced Product, quad, 26-V, 1.2-MHz operational amplifier | PW | 14 | -40 to 125
V62/06622-04XE TI

获取价格

HiRel Enhanced Product, quad, 26-V, 1.2-MHz operational amplifier | PW | 14 | -55 to 125