V1 thru V7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Standard rectifiers
• Ideal for automated placement
• Low forward voltage drop
• High forward surge capability
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
Typical Applications
DO‐214AC(SMA)
• For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Mechanical Data
• Case:DO-214AC, molded epoxy body,Epoxy meets UL 94V-0 flammability rating
• Terminal:Matte tin plated leads, solderable per J-STD-002 and JESD22B-106
• Polarity:Indicated by cathode band
Maximum Ratings and Electrical Characteristics
(TA = 25 °C unless otherwise noted)
V1
V2
V3
V4
V5
V6
V7
Unit
Parameter
Symbol
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
50
35
50
100
70
200
140
200
400
280
400
1.0
600
420
600
800
560
800
1000
700
V
V
V
A
VRRM
VRMS
VDC
100
1000
Maximum average forward rectified current
IF(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
30.0
A
IFSM
VF
Maximum forward voltage at IF=1.0Amps
1.0
5.0
Volts
uA
Maximum DC reverse
@Ta=25℃
IR
current at rated DC blocking
50.0
10.0
@Ta=125℃
Typical junction capacitance(Note1)
Typical thermal resistance(Note2)
Typical thermal resistance(Note2)
CJ
pF
75.0
20.0
RθJA
RθJL
℃/W
℃/W
Operating junction and storage temperature
range
TJ,
TSTG
- 55 to + 150
°C
Notes:1.Measured at 1.0MHz and applied reverse voltage of 4.0 D.C.
2.Thermal resistance from junction to lead, 0.197×0.197〃(5.0×5.0mm)copper pads to each terminal
www.goodark.com
1/4
2014.02-Rev.B