V-735 P
Vishay Sprague
Film Capacitors, High Current, Wrap-and-Fill,
Metallized Polypropylene
FEATURES
• Wire or lug terminals
• High stability
• High ripple to 30 A
• Low inductance
• Low ESR
• Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 105 °C
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP 1.0 %
Capacitance Range: 1.0 µF to 30.0 µF
Capacitance Tolerance: 10 %, 5 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
DC Voltage Rating: 100 WVDC to 400 WVDC
Equivalent Series Resistance: 20 kHz to 100 kHz
PHYSICAL CHARACTERISTICS
Dissipation Factor: 0.1 % maximum
Measured at 1000 Hz, at + 25 °C
Pull Test:
ΔV/ΔT: 10 V/ms maximum
Voltage Test: 200 % of rated voltage for 2 min
Wire Leads: - 5 lb (2.3 kg) for one min. No physical damage.
Terminal Lugs: - 10 lb (4.5. kg) for one min. No physical
damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Insulation Resistance: Measured at 100 WVDC after a
2 min charge.
At + 25 °C: 200 000 MΩ/µF, or 400 000 MΩ minimum
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DC Life Test: 140 % of rated voltage for 1000 h at + 105 °C.
No visible damage. No open or short circuits.
Maximum Δ CAP 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.10 %
DIMENSIONS in inches [millimeters]
Terminal Style L
1.750
[44.45]
Min.
L
1.750
[44.45]
Min.
D
Max.
0.0ꢀ2 [1.57]
D Max.< 0.700 [17.78], No. 20 AWG Wire 0.032 [0.812] Nominal Diameter
Tinned Solid Copper Wire (1)
≥
D Max. 0.700 [17.78], No. 18 AWG Wire 0.040 [1.01ꢀ] Nominal Diameter
Terminal Style H
Tinned Solid Copper Lug
D
Max.
L1
0.0ꢀ2 [1.57]
L2
0.0ꢀ2 [1.57]
0.3ꢀ0 0.005
[9.14 0.13]
0.0032 0.002
[0.81 0.05]
L
0.0ꢀ2 [1.57]
0.312 [7.9] Min.
L1 = L + 0.7ꢀꢀ [19.4ꢀ]
L2 = L + 0.437 [11.10]
0.15ꢀ 0.005 Dia.
[3.9ꢀ 0.13]
Note (1) Leads to be within 0.0ꢀ2" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge (Terminal Style L only).
Document Number: 42093
Revision: 12-Mar-09
For technical questions, contact: spresale@vishay.com
www.vishay.com
25