16mm A6
A6 Series — Miniature Switches and Pilot Devices: 16mm
Switches & Pilot Devices
Key features:
• 16mm (5/8”) mounting hole
• LED illumination
• Compact design saves space
• Momentary, Maintained, Selectors, and E-Stops
• Gold-clad Silver contacts for reliable low level switching
• Snap action contacts
• IP40 (dustproof) or IP65 (oiltight) versions
CSA Certified
UL Recognized
File No. LR21451
File No.E55996
R
IP40: Dustproof
Degree of Protection
IP65 Watertight/Oiltight
Contact Configuration
Maximum Voltage
Thermal Current
SPDT, DPDT
250V AC/DC
3A
Minimum Applicable Load
Contact Material
5V AC/DC, 1mA
Gold-clad silver
Terminal Style
.110” Solder/ Quick Connect
Operating Temperature
Operating Humidity
Contact Resistance
Insulation Resistance
Vibration Resistance
Shock Resistance
Electrical Life
-25º to +55ºC (no freezing)
45 to 85% RH
50mΩ maximum (initial value)
100MΩ minimum (500V DC megger)
10 to 55Hz, amplitude 1.5mm p-p
Damage limits: 500m/sec2 (approx. 50G) Operating extremes: 200m/sec2 (approx. 20G)
100,000 operations minimum (at full rated load)
Maintained: 100,000 operations minimum
Momentary: 1,000,000 operations minimum
Selector/Keylock: 250,000 operations minimum
Mechanical Life
Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles;
1,000V AC, 1 minute between terminals of the same pole;
1,500V AC, 1 minute between contact and lamp terminals.
Dielectric Strength
Illumination Unit: 2,000V AC, 1 min. between live part/ground
Soldering Temperature
Operating Voltage
20W/5 seconds or 260ºC/3 seconds
24V
120V
1.0A
240V
Resistive
—
0.5A
AC (50/60Hz)
DC
Inductive
Resistive
Inductive
—
0.7A
0.5A
1.0A
0.7A
5V DC 5%
0.2A
—
—
0.1A
6V AC/DC ( 10%)
12V AC/DC ( 10%)
24V AC/DC ( 10%)
AC: A, R, W, Y: 8mA
G, S: 7mA
DC: A, R, W, Y: 6mA
G, S: 5mA
Rated Voltage/Current
AC: 9mA
DC: 8mA
AC: 9mA
DC: 8mA
8mA
1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms.
2. LED lamp contains a built-in current limiting resistor and a protection diode.
3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
USA: 800-262-IDEC
Canada: 888-317-IDEC
457