This data sheet contains core information only. Please click here for the full data sheet.
UVQ Series
www.murata-ps.com
Low Profile, Isolated Quarter Brick
2.5–40 Amp DC/DC Converters
PRODUCT OVERVIEW
For efficient, fully isolated DC power in the small-
est space, Murata Power Solutions' UVQ series
quarter bricks offer output voltages from 1.5
to 48 Volts with currents up to 40 Amps. UVQs
operate over a wide temperature range (up to
+70°C at 200 lfm airflow) at full-rated power. The
optional mounting baseplate extends this to all
practical temperature ranges at full power.
UVQ’s achieve these impressive specifications
while delivering excellent electrical performance.
Overall noise is 35mVp-p (3.3V models) with fast
step response (down to 50μsec). These convert-
ers offer high stability even with no load and
tight output regulation. The unit is fully protected
against input over and undervoltage, output over-
current and short circuit. An on-board temperature
sensor shuts down the converter if thermal limits
are reached. Protection uses the “hiccup” (auto
restart) method.
A convenient remote On/Off control input oper-
ates by external digital logic, relay or transistor
input. To compensate for longer wiring and to
retain output voltage accuracy at the load, UVQ’s
include a Sense input to dynamically correct for
ohmic losses. A trim input may be connected to a
user’s adjustment potentiometer or trim resis-
tors for output voltage calibration closer than the
standard accuracy.
UVQ’s include industry-standard safety
Typical unit
certifications and BASIC I/O insulation provides
2250 Volt input/output isolation. Radiation emis-
sion testing is performed to widely-accepted
EMC standards. The UVQ’s may be considered
as higher performance replacements for some
Murata Power Solutions USQ models.
FEATURES
■
■
■
■
■
■
■
■
■
■
■
Standard quarter-brick package/pinout
Outputs from 1.5 to 48V up to 125W
Low profile 0.42" height
24 and 48Vdc nominal inputs
Fully isolated, 2250Vdc (BASIC) insulation
Designed for RoHS-6 compliance
Output overvoltage/short-circuit protected
On/Off control, trim and sense functions
High efficiency to 92%
Contents of full data sheet
Description, Photograph, Connection Diagram
Performance Specs and Ordering Guide, Pin 9 Option
Model Numbering, Ordering Guide Summary
Mechanical Specs, Input/Output Pinout
Detailed Electrical Specifications
Technical Notes
Soldering Guidelines
Performance Data
Page
1
2
3
4
Protected against temp. and voltage limits
5
Designed to meet UL/IEC/EN60950-1 safety
approvals
11
13
17
+SENSE
(7)
+VOUT
(8)
+VIN
(3)
Baseplate
(9)
Optional
SWITCH
CONTROL
–VOUT
(4)
–VIN
(1)
–SENSE
(5)
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
VOUT
TRIM
(6)
INPUT UNDERVOLTAGE, INPUT
OVERVOLTAGE, AND OUTPUT
OVERVOLTAGE COMPARATORS
* Can be ordered with positive (standard) or negative (optional) polarity.
REMOTE
ON/OFF
CONTROL*
(2)
Typical configuration — some models use a different topology
For full details go to
www.murata-ps.com/rohs
Figure 1. Simplified Schematic
www.murata-ps.com
email: sales@murata-ps.com
18 Sep 2009 MDC_UVQ Models.B15_short Page 1 of 4