USD025C - PRELIMINARY
Band 25 USD Series Duplexer
Features
▪ Low Loss with High Rejection
▪ Superior power handling and reliability
▪ Universal footprint across all FDD frequency bands
Applications
Part Dimensions: 63.0 × 11.4 × 10.6 mm • 21.0 g
Materials: Ag plated ceramic block with tin plated brass shield
▪ Wireless Infrastructure applications
▪ High-performance carrier-grade small-cells using linearized
PA for 1.0-2.0W at the antenna port.
▪ Wide-band pico-cells or small-cells requiring multi-channel
or carrier aggregation.
Description
Surface mount ceramic duplexer supports a universal footprint across all FDD frequency bands enabling the use of
a common system PCB. Provides superior rejection, insertion loss, reliability, as well as both peak and average
power handling compared to other duplexer technologies.
Electrical Specifications
Frequency
Typical
Spec.
Spec. over
Parameter
(MHz)
at 25⁰C
at 25⁰C
-40⁰C to +85⁰C
Nominal Impedance
Average Input Power
Peak Input Power
-
-
-
50 ohms
-
-
-
-
-
-
6.0 Watt max
60 Watt max
Antenna to UL Response
Passband Insertion Loss (5 MHz avg)
Passband Insertion Loss (single point)
Passband Return Loss
1850 - 1915
1850 - 1915
1850 - 1915
1930 - 1933
1933 - 1995
1781-1830
2.8 dB
3.4 dB
14 dB
52 dB
67 dB
15 dB
3.0 dB max
3.8 dB max
12 dB min
50 dB min
63 dB min
12 dB min
3.0 dB max
3.8 dB max
12 dB min
50 dB min
63 dB min
12 dB min
Attenuation:
DL to Antenna Response
Passband Insertion Loss (5 MHz avg)
Passband Insertion Loss (single point)
Passband Return Loss
1930 - 1995
1930 - 1995
1930 - 1995
1850 - 1912
1912 -1915
2025-2109
2.9 dB
3.2 dB
14 dB
70 dB
52 dB
15 dB
3.0 dB max
3.8 dB max
12 dB min
68 dB min
50 dB min
12 dB min
3.0 dB max
3.8 dB max
12 dB min
68 dB min
50 dB min
12 dB min
Attenuation:
DL to UL Response
Attenuation for UL band
1850 - 1912
1912 -1915
1930 - 1933
1933 - 1995
70 dB
52 dB
52 dB
67 dB
69 dB min
50 dB min
50 dB min
64 dB min
69 dB min
50 dB min
50 dB min
64 dB min
Attenuation for DL band
Note: CTS tests each unit to the critical specifications above.
Subsequent audits may deviate due to repeatability among
different test systems which shall not exceed these allowances.
Specification Allowance
Insertion Loss
Return Loss
Attenuation
0.1 dB
1.0 dB
1.0 dB
2018-10-12 Rev. B
Page 1 of 2
©2016 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.