USB5807C
7-Port USB 3.1 Gen 1 Hub
• Smart port controller operation
Highlights
• USB Hub with 7 USB 3.1 Gen 1 / USB 2.0 down-
stream ports
• USB-IF Battery Charger revision 1.2 support on
up & downstream ports (DCP, CDP, SDP)
-
Firmware handling of companion port power
controllers
• On-chip microcontroller
-
manages I/Os, VBUS, and other signals
• 8 KB RAM, 64 KB ROM
• FlexConnect: Downstream port able to swap with
upstream port, allowing master capable devices
to control other devices on the hub
• 8 KB One-Time-Programmable (OTP) ROM
-
Includes on-chip charge pump
• USB Link Power Management (LPM) support
• Configuration programming via OTP ROM,
SPI ROM, or SMBus
• Enhanced OEM configuration options available
through either OTP or SPI ROM
• FlexConnect
• USB-IF certified (TID 1595), supporting latest
Engineering Change Notices for compliance with
USB-IF logo testing for new USB Type-C™
industry initiative (Revision C or newer only)
-
Reversible upstream and downstream Port 1 roles
on command
• PortSwap
-
Configurable USB 2.0 differential pair signal swap
• PHYBoostTM
- Header Packet Timer (TD7.9, TD7.11, TD7.26)
- Power Management Timer (TD7.18, TD7.20, TD7.23)
-
Programmable USB transceiver drive strength for
recovering signal integrity
- Unacknowledged Connect and Remote
Wake Test Failure (TD10.25)
-
USB 2.0 Hi-Speed disconnect threshold adjust
(Revision C or newer only)
• Available in 100-pin (12mm x 12mm) VQFN
RoHS compliant package
• VariSenseTM
-
Programmable USB receive sensitivity
• Commercial and industrial grade temperature
support
• Port Split
-
USB2.0 and USB3.1 Gen1 port operation can be
split for custom applications using embedded
USB3.x devices in parallel with USB2.0 devices.
Target Applications
• Standalone USB Hubs
• Laptop Docks
• Compatible with Microsoft Windows 10, 8, 7, XP,
Apple OS X 10.4+, and Linux hub drivers
• PC Motherboards
• PC Monitor Docks
• Optimized for low-power operation and low ther-
• Multi-function USB 3.1 Gen 1 Peripherals
mal dissipation
• Package
Key Benefits
• USB 3.1 Gen 1 compliant 5 Gbps, 480 Mbps,
12 Mbps, and 1.5Mbps operation
-
100-pin VQFN (12mm x 12mm)
-
-
-
5V tolerant USB 2.0 pins
1.32V tolerant USB 3.1 Gen 1 pins
Integrated termination and pull-up/down resistors
• Supports battery charging of most popular battery
powered devices on all ports
-
USB-IF Battery Charging rev. 1.2 support
(DCP, CDP, SDP)
-
-
-
-
-
Apple® portable product charger emulation
Chinese YD/T 1591-2006 charger emulation
Chinese YD/T 1591-2009 charger emulation
European Union universal mobile charger support
Support for Microchip UCS100x family of battery
charging controllers
-
Supports additional portable devices
2019 Microchip Technology Inc.
DS00003182A-page 1