USB3803
USB 2.0 High-Speed Hub Controller Optimized
for Portable Applications
• VariSenseTM
Features
- Programmable USB receiver sensitivity
• flexPWR® Technology
• Integrated USB 2.0 Compatible 3-Port Hub
• Advanced power saving features:
- 1 A Typical Standby Current
- Port goes into power saving state when no
devices are connected downstream
- Low current design ideal for battery powered
applications
- Internal supply switching provides low power
modes
- Port is shut down when port is disabled
• External 12, 19.2, 26, or 38.4 MHz clock input
- Digital core shutdown in Bypass and Standby
Modes
• Internal 3.3V & 1.2V Voltage Regulators for single
supply operation
• Provides USB Battery Charger Detection for:
- External VBAT and 1.8V dual supply input
option
- USB-IF Battery Charging 1.1 compliant Dedi-
cated Charging Ports (DCP)
• Internal Short Circuit protection of USB differential
signal pins
- USB-IF Battery Charging 1.1 compliant
Charging Downstream Port (CDP)
• ±5kV HBM ESD Protection
- Standard Downstream Port (SDP); that is,
USB host or downstream hub port
• 25-pin WLCS (1.95mm x 1.95mm Wafer Level
Chip Scale) Package - 0.4mm ball pitch
- Downstream Hub Ports Support USB-IF Bat-
tery Charging 1.1 as Charging Downstream
Port (CDP)
Target Applications
The USB3803 is targeted for applications where more
than one USB port is required. As mobile devices add
more features and the systems become more complex,
it is necessary to have more than one USB port to com-
municate with internal and peripheral devices.
• Supports either Single-TT or Multi-TT configura-
tions for Full-Speed and Low-Speed connections
(when connected to a High-Speed host)
• Bypass Switch for low power single port operation
- Battery charging detection using a PMIC
- Stereo and mono/mic audio
• Mobile Phones
• Ultra Mobile PCs
- USB1.1 Data
• Tablet Computers
• Enhanced configuration options available through
serial I2C Slave Port
• Digital Still Cameras
• Digital Video Camcorders
• Gaming Consoles
- VID/PID/DID
- String Descriptors
• PDAs
- Configuration options for Hub
• Portable Media Players
• GPS Personal Navigation Devices
• Media Players/Viewers
• Internal Default configuration option when serial
I2C host is not available
• MultiTRAKTM
- Dedicated Transaction Translator per port
• PortMap
- Configurable port mapping and disable
sequencing
• PortSwap
- Configurable differential intra-pair signal
swapping
• PHYBoost
- Programmable USB transceiver drive
strength for recovering signal integrity
2014-2020 Microchip Technology Inc.
DS00001691D-page 1