USB3316
Hi-Speed USB Transceiver
with 1.8V ULPI Interface -
19.2MHz Reference Clock
Data Brief
PRODUCT FEATURES
USB-IF “Hi-Speed” compliant to the Universal Serial
Bus Specification Rev 2.0
Carkit UART mode for non-USB serial data transfers
Integrated USB Switch
—
—
—
—
—
Allows single USB port of connection
High speed data
Battery charging
Stereo and mono/mic audio
USB1.1 data
Interface compliant with the ULPI Specification
revision 1.1 as a Single Data Rate (SDR) PHY
1.8V IO Voltage (+/- 10%)
SMSC flexPWRTM Technology
—
Low current design ideal for battery powered
Industrial Operating Temperature -40°C to +85°C
Packaging Options
—
—
—
applications
—
“Sleep” mode tri-states all ULPI pins and places the
part in a low current state
24 pin QFN lead-free RoHS compliant package
(4 x 4 x 0.90 mm height)
25 ball VFBGA lead-free RoHS compliant package also
available; (3 x 3 x 0.88mm height)
25 ball UFBGA lead-free RoHS compliant package also
available; (3 x 3 x 0.61mm height)
Supports FS pre-amble for FS hubs with a LS device
attached (UTMI+ Level 3)
Supports HS SOF and LS keep-alive pulse
Includes full support for the optional On-The-Go
(OTG) protocol detailed in the On-The-Go
Supplement Revision 1.0a specification
Applications
Supports the OTG Host Negotiation Protocol (HNP)
and Session Request Protocol (SRP)
The USB3316 is targeted for any application where a Hi-
Speed USB connection is desired and when board
space, power, and interface pins must be minimized.
Allows host to turn VBUS off to conserve battery
power in OTG applications
Support OTG monitoring of VBUS levels with internal
comparators
The USB3316 is well suited for:
Cell Phones
“Wrapper-less” design for optimal timing performance
and design ease
PDAs
—
Low Latency Hi-Speed Receiver (43 Hi-Speed clocks
Max) allows use of legacy UTMI Links with a ULPI
bridge
MP3 Players
GPS Personal Navigation
Scanners
Internal 5V cable short-circuit protection of ID, DP
and DM lines to VBUS or ground
External Hard Drives
Digital Still and Video Cameras
Portable Media Players
Entertainment Devices
Printers
19.2MHz Reference Clock operation
—
0 to 3.6V input drive tolerant
—
Able to accept “noisy” clock sources
Internal low jitter PLL for 480MHz Hi-Speed USB
operation
Set Top Boxes
Internal detection of the value of resistance to ground
on the ID pin
Video Record/Playback Systems
IP and Video Phones
Gaming Consoles
POS Terminals
Integrated battery to 3.3V LDO regulator
—
2.2uF bypass capacitor
—
100mV dropout voltage
Integrated ESD protection circuits
—
Up to +-15kV without any external devices
SMSC USB3316
PRODUCT PREVIEW
Revision 1.7 (03-17-08)