PRELIMINARY PRODUCT INFORMATION
MOS INTEGRATED CIRCUIT
µPD784217Y,784218Y
16/8-BIT SINGLE-CHIP MICROCONTROLLERS
The µPD784218Y is based on the µPD784218 with an I2C bus control function appended, and is ideal for
applications in audio-visual.
A flash memory version, the µPD78F4218Y, which can operate in the same supply voltage range as the mask
ROM version, and various development tools are under development.
The functions are explained in detail in the following user’s manuals. Be sure to read these manuals when
designing your system.
µPD784218, 784218Y Subseries User’s Manual Hardware : Planned
78K/IV Series User’s Manual Instructions
: U10905E
FEATURES
• On-chip I2C bus
• Standby function
• ROM correction function
HALT/STOP/IDLE mode
• InheritsperipheralfunctionsofµPD78078YSubseries
• Pin-compatible with µPD784218 Subseries
• Minimum instruction execution time
160 ns (main system clock fXX = 12.5 MHz)
61 µs (subsystem clock fXT = 32.768 kHz)
• High-capacity memory
In power-saving mode: HALT/IDLE mode (with
subsystem clock)
• Clock division function
• Watch timer: 1 channel
• Watchdog timer: 1 channel
• Clock output function
• ROM: 192 Kbytes (µPD784217Y)
256 Kbytes (µPD784218Y)
fXX, fXX/2, fXX/22, fXX/23, fXX/24, fXX/25, fXX/26, fXX/27, fXT
selectable
• RAM: 12 800 bytes (µPD784217Y, 784218Y)
• I/O port: 86 pins
• Buzzer output function
fXX/210, fXX/211, fXX/212, fXX/213 selectable
• A/D converter: 8-bit resolution × 8 channels
• D/A converter: 8-bit resolution × 2 channels
• Supply voltage: VDD = 1.8 to 5.5 V
• Timer/counter: 16-bit timer/counter × 1 unit
8-bit timer/counter × 6 units
• Serial interface: 3 channels
UART/IOE (3-wire serial I/O): 2 channels
CSI (3-wire serial I/O, multi-master supporting I2C bus): 1 channel
APPLICATION FIELDS
Cellular telephones, PHS, cordless telephones, CD-ROM, AV systems, etc.
Unless mentioned otherwise, references in this document to the µPD784218Y refer to the µPD784217Y
and µPD784218Y.
The information contained in this document is being issued in advance of the production cycle for the
device. The parameters for the device may change before final production or NEC Corporation, at its
own discretion, may withdraw the device prior to its production.
Document No. U12304EJ1V0PM00 (1st edition)
Date Published July 1997 N
Printed in Japan
1997
©