DATA SHEET
MOS INTEGRATED CIRCUIT
µPD6604
4-BIT SINGLE-CHIP MICROCONTROLLER
FOR INFRARED REMOTE CONTROL TRANSMISSION
DESCRIPTION
Equipped with low-voltage 1.8 V operation, a carrier generation circuit for infrared remote control transmission,
a standby release function through key entry, and a programmable timer, the µPD6604 is suitable for infrared remote
control transmitters.
For the µPD6604, we have made available the one-time PROM product µPD66P04B for program evaluation or
small-quantity production.
FEATURES
• Program memory (ROM)
• Data memory (RAM)
: 1002 × 10 bits
: 32 × 4 bits
• Built-in carrier generation circuit for infrared remote control
• 9-bit programmable timer
• Command execution time
• Stack level
: 1 channel
: 8 µs (when operating at fOSC = 1 MHz: RC oscillation)
: 1 level (Stack RAM is for data memory RF as well.)
• I/O pins (KI/O)
: 8 pins
• Input pins (KI)
: 4 pins
• Sense input pin (S0)
• S1/LED pin (I/O)
: 1 pin
: 1 pin (When in output mode, this is the remote control transmission
display pin.)
• Power supply voltage
: VDD = 1.8 to 3.6 V (when operating at fOSC = 500 kHz)
VDD = 2.2 to 3.6 V (when operating at fOSC = 1 MHz)
• Operating ambient temperature : TA = –40 to + 85 °C
• Oscillator frequency
: fOSC = 300 kHz to 1 MHz
• POC circuit (Mask option)
APPLICATION
Infrared remote control transmitter (for key-less entry)
Because the µPD6604 uses an RC oscillation system clock, its accuracy and stability are lower than
the models using ceramic oscillation.
In applications where the clock accuracy and stability pose a problem, use the µPD6134 (ceramic
oscillation type).
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability
and additional information.
Document No. U11281EJ3V0DSJ1 (3rd edition)
Date Published November 2000 N CP(K)
Printed in Japan
The mark shows major revised points.
1996
©