DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
μPC844GR-9LG, μPC4744GR-9LG
SINGLE POWER SUPPLY, HIGH SPEED,
WIDE BAND, QUAD OPERATIONAL AMPLIFIERS
<R>
DESCRIPTION
The μ PC844GR-9LG, μ PC4744GR-9LG are a high speed version of the operational amplifier μ PC451GR-9LG,
μPC324GR-9LG for general single power supply use with high speed pulse response and high stabilization. A high
speed PNP transistor is used in the circuit which improves the characteristics such as a slew rate, gain-bandwidth
product, stabilization of the withstand load capacitance, with no crossover distortion compared to μ PC451GR-9LG,
μPC324GR-9LG.
Therefore, μ PC844GR-9LG, μ PC4744GR-9LG can be used in a wide range of application circuits for single power
supply AC amplifier, active filters, line driver and an amplifier for light receiving element etc.
The μ PC844GR-9LG which expands temperature type is suited for wide operating ambient temperature use, and
μPC4744GR-9LG is used for general purposes.
μ PC842GR-9LG, μ PC4742GR-9LG which are dual types with the same circuit configuration are also available as
series of operational amplifiers.
<R>
FEATURES
• Slew Rate (AV = +1)
(V+ = +5 V, V− = GND)
• Gain Band Width Product
• Input Offset Voltage
• Input Offset Current
7 V/μs (TYP.)
• Stability to capacitive loads (load capacity, 1000 pF)
• Internal frequency compensation
3.5 MHz (TYP.)
2 mV (TYP.)
6 nA (TYP.)
• Output short-circuit protection
• A pin connection (pin compatible) of a standard quad operational
amplifier.
• Wide operating ambient temperature range
μ PC844GR-9LG: TA = −40 to +125°C, μ PC4744GR-9LG: TA = −40 to +85°C
• Small Package (The mounting area is reduced to half compared to the conventional 14-pin plastic SOP (1.27 mm
pitch))
<R> ORDERING INFORMATION
Part Number
Selected Grade
Package
Package Type
μ PC844GR-9LG-E1-A Note
Standard
Standard
Standard
Standard
14-pin plastic TSSOP (5.72 mm(225))
• 16 mm wide embossed taping
• Pin 1 on draw-out side
μ PC844GR-9LG-E2-A Note
μ PC4744GR-9LG-E1-A Note
μ PC4744GR-9LG-E2-A Note
14-pin plastic TSSOP (5.72 mm(225))
14-pin plastic TSSOP(5.72 mm(225))
14-pin plastic TSSOP(5.72 mm(225))
• 16 mm wide embossed taping
• Pin 1 at take-up side
• 16 mm wide embossed taping
• Pin 1 on draw-out side
• 16 mm wide embossed taping
• Pin 1 at take-up side
Note Pb-free (This product does not contain Pb in the external electrode and other parts.)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G17928EJ4V0DS00 (4th edition)
Date Published December 2007 NS
Printed in Japan
2006, 2007
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.