NEC’s LOW POWER
GPS RF RECEIVER
BIPOLAR ANALOG + INTEGRATED CIRCUIT
UPB1009K
DESCRIPTION
The µPB1009K is a silicon monolithic IC developed for GPS receivers. This IC integrates a full VCO, second IF
filter, 4-bit ADC, and digital control interface to reduce cost and mounting space. In addition, its power consumption
is low.
Moreover, use of a TCXO with frequency of 16.368 MHz/16.384 MHz, 14.4 MHz, 19.2 MHz, or 26 MHz switchable
with an on-chip divider is possible.
NEC’s stringent quality assurance and test procedures ensure the highest reliability and performance.
FEATURES
•
Double conversion
: fREFin = 16.368 MHz, f1stIFin = 61.380 MHz, f2ndIFin = 4.092 MHz
: fREFin = 14.4, 16.384, 19.2, 26 MHz, f1stIFin = 62.980 MHz, f2ndIFin = 2.556 MHz
: On-chip switchable frequency divider (1/N = 100, 3/256, 9/1024, 65/4096)
: On-chip 4-bit A/D converter
•
•
•
•
•
•
Multiple system clocks
A/D converter
High-density RF block
Supply voltage
: On-chip VCO tank circuit and 2ndIF filter
: VCC = 2.7 to 3.3 V
Low current consumption
: ICC = 26.0 mA TYP. @ VCC = 3.0 V, N = 100
High-density surface mountable : 44-pin plastic QFN
APPLICATIONS
•
•
Consumer use GPS receiver of reference frequency 16.368 MHz, 2nd IF frequency 4.092 MHz
Consumer use GPS receiver of reference frequency 14.4, 16.384, 19.2, 26 MHz, 2ndIF frequency 2.556 MHz
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.