www.datasheet4u.com
Preliminary
Single 12V Input Supply Dual Regulator -
Synchronous-Buck-PWM and Linear-Regulator Controller
uP6161
Features
General Description
The uP6161 integrates a high performance synchronous- Operate with Single 12V Supply
rectified buck controller and a linear-regulator controller.
This part works with a single +12V supply voltage and
delivers two high quality output voltages for both processing
Self-Regulated 9V Drive Voltage
Integrated Boot Diode
Provide Two Regulated Voltages
unit and memory unit. An internal linear regulator provides
optimum 9V drive voltage for efficiency and thermal
management.
One Synchronous-Rectified Buck Controller
One Linear Controller
Both Controllers Drive N-Channel MOSFETs
Smaller Converter Size
The buck controller features internal MOSFET drivers that
supports bootstrapped voltage for high efficiency power
conversion. The bootstrap diode is built-in to simplify the
circuit design and minimize external part count. It
incorporates simple, single feedback loop, voltage-control
with fast transient response.
Excellent Output Voltage Regulation
1.5% for Buck Controller
2% for Linear Controller
Simple Single-Loop Control Design
Voltage-Mode PWM Control
The linear controller drives an externalN-Channel MOSFET
with under voltage protection during both soft start and
normal operation.
Fast Transient Response
High-Bandwidth Error Amplifier
Lossless, Programmable Overcurrent Protection
Uses Lower MOSFET RDS(ON)
Other features include adjustable operation frequency,
internal soft start, under voltage protection, adjustable over
current protection and shutdown function. With the above
function, this part provides customers a compact, well
protected and cost-effective solution. This part is available
in SOP-14 and QFN3x3 -16L packages.
Adjustable Frequency from 150kHz to 1MHz
Internal Soft Start for Both Outputs
Under Voltage Protection for Both Outputs
including Soft Start Cycle
Applications
SOP-14 and QFN3x3-16 packages
Power Supplies for Microprocessors or
RoHS Compliant and 100% Lead Free
Subsystem Power Supplies
Ordering Information
Cable Modems, Set Top Boxes, and DSL
Modems
Order Number Package Type
Remark
Industrial Power Supplies; General Purpose
uP6161S14
uP6161Q
SOP - 14
Supplies
QFN3x3 - 16
12V Input DC-DC Regulators
Low-Voltage Distributed Power Supplies
Note: uPI products are compatible with the current IPC/
JEDEC J-STD-020 and RoHS requirements. They are 100%
matte tin (Sn) plating and suitable for use in SnPb or Pb-
free soldering processes.
uPI Semiconductor Corp., http://www.upi-semi.com
Rev. P00, File Name: uP6161-DS-P0001
1