ULT Series
www.murata-ps.com
Thirty-Second-Brick Isolated DC/DC Converters
with 2:1 Wide Input Range
FEATURES
2:1 Input Voltage Range (36V – 75V, 48 Volts,
Typical units
nominal)
Up to 30W output power @ 36 – 48 – 75Vin
89% efficiency (typical, 5Vout)
PRODUCT OVERVIEW
Through-hole and optional SMT package
The ULT Series isolated DC/DC converter repre-
sents the next generation converters in a 1/32
brick package. This converter is the “industry-
standard” 1/32 brick form factor (0.92" x 0.75"
x 0.35"). The product fully complies with RoHS-6
directive.
The thirty-second brick is offered as an open
frame module; mounting options include through-
hole or surface mount (SMT) pinouts. Typical
applications include Optical Networking Equipment,
Wireless Base Station applications, Microwave
Radio communications, and Telecom and Data
Equipment applications.
Modules will supply an output power of up to
30 watts over the input range of 36-75V. The ULT
Series also provides a cost effective approach to
highly efficient systems requiring 12V, 5V, and 3.3V
voltages, eliminating the requirement for a “Bus
Converter” and multiple PoL converters. The ULT
family provides basic insulation with 1500Vdc iso-
lation meeting the requirements of UL/IEC 60950.
The ULT series modules are DOSA compatible
industry standard 1/32 brick.
Miniature 1/32 brick open frame package
Positive & Negative Logic On/Off control option
Over-current & Over-temperature protection
Low output ripple and noise
Strong thermal derating characteristics
Operational Temperature Range –40°C to +85°C
1500V I/O isolation
Tight line/load regulation
Certified to UL/IEC 60950-1, CAN/CSA C22.2 No.
60950-1, safety approvals, 2nd Edition
*TPMBUJPO
F1
+Vin (1)
+Vout (8)
Barrier
tꢀ4XJUDIJOH
tꢀ'JMUFST
ꢁ4FOTFꢀꢂꢃꢄ
External
DC
Power
Source
On/Off
Control
(2)
Controller
and Power
5SBOTGFS
tꢀ$VSSFOUꢀ4FOTF
ꢅ4FOTFꢀꢂꢆꢄ
Trim (6)
Open = On
$MPTFEꢀꢇꢀ0GG
ꢂ1PTJUJWFꢀ
polarity)
Reference and
Error Amplifier
-Vin (3)
-Vout (4)
Figure 1. Connection Diagram
Typical topology is shown. Murata Power
Solutions recommends an external fuse.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_ULT Series.F05 Page 1 of 26