Type ULP, 2 and 3 mm Ultra Low Profile Aluminum Electrolytic Capacitor, 85 ºC
High Energy Density
At 2 and 3 mm thin, type ULP offers the highest energy density
available in a low profile aluminum electrolytic. It’s ideal for the lowest
profile circuits where high capacitance is needed for bulk storage. Look
to type ULP to replace arrays of SMT solid tantalum capacitors.
Highlights
- 2 or 3 mm profile
- High energy density .4 J/cc
- Replaces banks of solid tantalum chips
- 3000 hr life @ 85 ºC without voltage derating
Specifications
Temperature Range
–40 °C to 85 °C, at 100% rated voltage
120% of the rated working Vdc
500 μF to 24,000 μF
Surge Voltage
Capacitance Range
Capacitance Tolerance
20% at 120 Hz and 25 °C
DC Leakage Current
After a five minute application of the rated working voltage at +25 °C :
ɪ ≤ 0.001CV
Moisture Resistance
After 500 hours storage at +60°C and 90% to 95% RH with or without load, the
capacitor will meet the following limits:
∆C = +20%/–20% of the initial measured value.
ESR ≤ the initial specified value
DCL ≤ the initial specified value
DC Life Test
Apply rated DC working voltage at 85°C for 3000 hours, and then stabilize
them to +25°C.
Capacitors will meet the following limits:
ΔC = 20% of the initial measured value
ESR ≤ the initial specified value
DCL ≤ the initial specified value
Shelf Life Test
Shelf life is typically 5 to 10 years. Accelerated test:
After 500 hours at 85°C, capacitors will meet the initial limits after stabilization
at 25°C.
Vibration
MIL-STD-202, Meth. 204, Sine Swept, IEC 60068-2-6 Standard ULP: 10g
Mounting: Vibration capability is dependent upon mounting restraint. To
achieve the high vibration levels as published on right, additional mounting
restraint is required.
Low Temperature Characteristics
Impedence Ratio Z-40 º/ Z+25 ºC @120 Hz
≤ 10 (4 Vdc - 10 Vdc)
≤ 4 (16 Vdc - 63 Vdc)
Altitude
60,000 feet max
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800