ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type, High Voltage.
High Reliability.
ULH
Chip type, High voltage and High Reliability.
Load life of 4000 hours at +125°C.
Applicable to automatic mounting machine
using carrier tape.
Long Life
ULT
ULH
Compliant to the RoHS directive (2011/65/EU,(EU)2015/863).
AEC-Q200 Qualified. Please contact us for details.
Specifications
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
–40 to +125°C
160 to 450V
2.2 to 27µF
20% at 120Hz, 20°C
After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA).
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
160
0.20
200
0.20
250
0.25
400
0.25
450
0.30
Tangent of loss angle (tan δ)
tan δ (max.)
Measurement frequency : 120Hz
Rated voltage (V)
160
6
200
6
250
10
400
10
450
15
Stability at Low Temperature
Impedance ratio
ZT / Z20 (max.)
Z(–40°C) / Z(+20°C)
Capacitance change
tan δ
Leakage current
Within 30% of the initial capacitance value
300% or less than the intial specified value
Less than or equal to the initial specified value
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 4000 hours at 125°C.
Endurance
Shelf Life
After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds,
Capacitance change
tan δ
Leakage current
Within 10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
which is maintained at 250°C and then performing voltage
treatment based on JIS C 5101-4 clause 4.1 at 20°C, they
shall meet the characteristic requirements listed at right
when they are removed from the plate.
Resistance to soldering
heat
Marking
Black print on the case top.
※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V)
Chip Type
Type numbering system (Example : 400V 5.6 F)
µ
1
2
3
4
5
6
7
8
9 10 11 12 13 14
Positive
(φ8, φ10)
Voltage(2G : 400V)
Series
Plastic platform
U L H 2 G 5 R 6 M N L 1 G S
C
0.2
0.3max.
Lot No.
Taping code
Configuration
Trade mark
Capacitance tolerance ( 20ꢀ)
Rated capacitance
Rated voltage
(
5.6µF
)
)
Capacitance
L
1.0
H
Negative
(
400V
Pressure relief vent
Series name
Type
(mm)
φD × L
8 × 10
2.9
8.3
8.3
3.1
10
10 × 10 10 × 13.5
A
3.2
10.3
10.3
4.5
3.2
10.3
10.3
4.5
B
C
E
L
Voltage
V
160 200 250 400 450
2C 2D 2E 2G 2W
10
13.5
H
0.8 to 1.1 0.8 to 1.1 0.8 to 1.1
Code
Frequency coefficient of rated ripple current
Frequency
50 Hz
120 Hz 300 Hz
1 kHz 10 kHz or more
Coefficient
0.70
1.00 1.17
1.36
1.50
Dimension table in next page.
CAT.8100M