UHE Series
www.murata-ps.com
Isolated, High Efficiency, 1.6" × 2"
2-10 Amp, 12-30 Watt DC/DC Converters
Typical units
Housed in smaller, 1.6" x 2" x 0.40" (41 x 51 x 10.2mm)
packages carrying the standard 2" x 2" pinout, MPS’s new
UHE Series DC/DC Converters deliver more current/power
(up to 10A/30W) than currently available from either
package size.
FEATURES
PRODUCT OVERVIEW
The UHE 12-30W Series of high-efficiency,
isolated DC/DC’s provide output power ranging
from 10 Amps @ 1.2V to 2 Amps @ 15V. Offering
both 2:1 and 4:1 input voltage ranges, UHE’s meet
VIN requirements from 9 to 75 Volts.
All devices feature full I/O fault protection
including: input overvoltage and undervoltage
shutdown, precise output overvoltage protection
(a rarity on low-voltage outputs), output current
limiting, short-circuit protection, and thermal
shutdown.
All UHE models incorporate a VOUT Trim function
and an On/Off Control pin (positive or negative
logic). Low-voltage models (1.2V to 5V) offer
optional sense pins facilitating either remote load
regulation or current sharing for true N+1 redun-
dancy. All models are certified to the BASIC insula-
tion requirements of UL/EN60950-1 (2nd Edition),
and 48VIN (75V max.) models carry the CE mark.
Selected models are RoHS compliant (Reduction
of Hazardous Substances).
ꢀThe most IOUT/POUT in this format
ꢀLower priced than bricks
ꢀSmall 1.6" x 2" x 0.4" plastic package
with standard 2" x 2" pinout
ꢀOutput configurations:
1.2/1.5/1.8/2.5VOUT @ 10 Amps
3.3/5VOUT @ 25 Watts
Taking full advantage of the synchronous-
rectifier, forward topology, UHEs boast outstanding
efficiency (some models exceed 91%) enabling
full-power operation to ambient temperatures as
high as +60°C, without air flow. Assembled using
fully automated, SMT-on-pcb techniques, UHEs
provide stable no-load operation, excellent line
( 0.1%) and load ( 0.15%) regulation, quick step
response (200μsec), and low output ripple/noise
(50-100mVp-p). Additionally, the UHEs unique
output design eliminates one of the topology’s few
shortcomings–output reverse conduction.
5/12/15VOUT @ 30 Watts
ꢀFive input ranges from 9-75 Volts
ꢀEfficiencies as high as 91.5%
ꢀStable no-load operation
ꢀOptional Sense pins for low VOUT
ꢀThermal shutdown, I/O protected
ꢀ1500 Vdc I/O BASIC Insulation
ꢀUL/EN60950-1 certified (2nd Edition);
CE marked for Q48 models
ꢀRoHS compliant
+INPUT
(1)
+OUTPUT
(6)
SWITCH
CONTROL
+SENSE
(5)
–OUTPUT
(7)
–SENSE
(8)
OPTO
ISOLATION
THERMAL
SHUTDOWN
–INPUT
(2)
OVERVOLTAGE
COMPARATOR
PWM
CONTROLLER
REFERENCE &
ERROR AMP
OPTO
ISOLATION
VOUT TRIM
(9)
UVLO & OVLO
COMPARATORS
ON/OFF
CONTROL
(4)
Typical topology is shown.
c Optional comparator feedback. Contact MPS.
d Sense pins are optional on 1.2-5VOUT models ("R" suffix).
One phase of two is shown.
For full details go to
www.murata-ps.com/rohs
*
Figure 1. Simplified Block Diagram
www.murata-ps.com/support
MDC_UHE_12-30W Series.C01 Page 1 of 16