2547
PROTECTED
QUAD POWER DRIVERS
2547
PROTECTED
QUAD POWER DRIVERS
Providing interface between low-level logic and power loads, the
UDK/UDN/UDQ2547B and UDK/UDN/UDQ2547EB quad power
drivers combine logic gates and high-current bipolar outputs with
complete output protection. Each of the four outputs will sink 600 mA
in the ON state. The outputs have a minimum breakdown voltage
(load dump) of 60 V and a sustaining voltage of 40 V. The inputs are
compatible with TTL and 5 V CMOS logic systems and include internal
pull-down resistors to ensure that the outputs remain OFF if the inputs
are open-circuited.
UDx2547B
FAULT
OUT
1
2
3
4
16
IN
IN
1
2
15
14
1
OUT
ENABLE
2
13
12
11
GROUND
GROUND
GROUND
Over-current protection for each channel has been designed into
these devices and is activated at approximately 1.3 A. It protects each
output from short circuits with supply voltages up to 25 V. When a
maximum driver output current is reached, that output drive is reduced
linearly, maintaining a constant load current. If the over-current or
short circuit condition continues, each channel has an independent
thermal limit circuit which will sense the rise in junction temperature
and turn OFF the individual channel that is at fault. Foldback circuitry
decreases the output current if excessive voltage is present across the
output and assists in keeping the device within its SOA (safe operating
area).
5
6
GROUND
SUPPLY
OUT
3
V
CC
NO
CONNECT.
7
8
10
9
IN
IN
3
4
OUT
4
Dwg. PP-018A
Each output also includes diagnostics for increased device protec-
tion. If any output is shorted or opened, the diagnostics can signal the
controlling circuitry through a common FAULT pin.
ABSOLUTE MAXIMUM RATINGS
at TA = 25°C
Output Voltage, VOUT ............................ 60 V
These devices can be used to drive various resistive loads includ-
ing incandescent lamps (without warming or limiting resistors). With
the addition of external output clamp diodes, they can be used to drive
inductive loads such as relays, solenoids, or dc stepping motors.
Over-Current Protected Output Voltage,
VOUT ............................................... 25 V
Output Current, IOUT .......................... 1.3 A*
FAULT Output Voltage, VF ................... 40 V
Supply Voltage, VCC ............................ 7.0 V
Input Voltage, VIN or VEN ...................... 7.0 V
The suffix ‘B’ devices are 16-pin power DIPs while the suffix ‘EB’
devices are 28-lead power PLCCs for surface-mount applications.
Both packages are of batwing construction to provide for maximum
package power dissipation.
Package Power Dissipation,
PD ........................................ See Graph
Operating Temperature Range, TA
FEATURES
Prefix ‘UDK’ ............... -40°C to +125°C
Prefix ‘UDN’ ................. -20°C to +85°C
Prefix ‘UDQ’ ................. -40°C to +85°C
Storage Temperature Range,
■ Output SOA Protection
■ Low Output-Saturation Voltage
■ Diagnostic FAULT Output ■ TTL and 5 V CMOS Compatible Inputs
■ Independent Over-Current Protection for Each Driver
■ Independent Thermal Protection for Each Driver
■ 600 mA Output Current per Channel
TS ............................... -55°C to +150°C
*Outputs are current limited at approximately
1.3 A per driver and junction temperature limited
if current in excess of 1.3 A is attempted. See
Circuit Description and Application for further
information.
Always order by complete part number: a prefix to indicate operat-
ing temperature range + the basic four-digit part number + a suffix to
indicate package style, e.g., UDK2547EB .
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
