2543
PROTECTED
QUAD POWER DRIVER
Providing interface between low-level logic and power loads to
100 W, the UDx2543B and UDx2543EB quad power drivers combine
AND logic gates and high-current bipolar outputs. Each of the four
independent outputs can sink up to 700 mA in the ON state. The
outputs have a minimum breakdown voltage (load dump) of 60 V and
a sustaining voltage of 35 V. The inputs are compatible with most
TTL, DTL, LSTTL, and 5 V CMOS and PMOS logic systems.
UDN/UDQ2543B
1
2
3
4
16
IN
IN
OUT
4
3
4
15
14
K
ENABLE
GROUND
GROUND
OUT
3
Over-current protection has been designed into each channel of
the UDx2543B/EB and typically occurs at 1 A. It protects any one
channel from output short circuits with supply voltages up to 25 V.
When the maximum output current is reached, that output stage is
driven linearly. If the over-current condition continues, that output’s
thermal limiting will operate, limiting that output’s power dissipation to
approximately 2.4 W. The outputs also include diodes for voltage
clamping with inductive loads such as relays, solenoids, or dc stepper
motors.
13
12
11
10
9
GROUND
5
6
GROUND
OUT
2
V
CC
7
8
K
IN
IN
2
1
OUT
1
These devices are supplied in a 16-pin power DIP of batwing
construction (suffix ‘B’) to provide for maximum package power dissi-
pation. They are also available in a 28-lead PLCC (suffix ‘EB’) for
surface-mount applications. All devices are rated for continuous
operation over the temperature range of -20°C to +85°C (UDN2543B/
EB) or for use in automotive applications over an extended tempera-
ture range as the UDQ2543B/EB.
Dwg. PP-017-1
FEATURES
ABSOLUTE MAXIMUM RATINGS
at TA = 25°C
I 700 mA Output Current per Channel
I Low Output-Saturation Voltage
Output Voltage, VOUT . . . . . . . . . . . . . 60 V
I Integral Output Transient-Suppression Diodes
I TTL, CMOS, PMOS, NMOS Compatible Inputs
I Independent Over-Current Protection for Each Output
Over-Current Protected Output Voltage,
V
OUT . . . . . . . . . . . . . . . . . . . . . . . 25 V
Output Current, IOUT . . . . . . . . . . . . . 1.0 A*
Supply Voltage, VCC . . . . . . . . . . . . . . 7.0 V
Input Voltage, VIN or VEN . . . . . . . . . . 18 V
Package Power Dissipation,
PD . . . . . . . . . . . . . . . . . . . . See Graph
Operating Temperature Range, TA
Always order by complete part number:
(UDN2543B/EB) . . . . -20°C to +85°C
(UDQ2543B/EB) . . . . -40°C to +85°C
Storage Temperature Range,
Part Number
UDN2543B
UDN2543EB
UDQ2543B
UDQ2543EB
Package
16-Pin DIP
Operating Temperature
-20°C to +85°C
TS . . . . . . . . . . . . . . . -55°C to +150°C
28-Lead PLCC
16-Pin DIP
-20°C to +85°C
*Outputs are peak current limited at approxi-
mately 1.0 A per driver. See Circuit Description
and Applications for further information.
-40°C to +85°C
28-Lead PLCC
-40°C to +85°C