UCS1001-3 UCS1001-4
USB Port Power Controller with Charger Emulation
Datasheet
PRODUCT FEATURES
General Description
Features
Port power switch with two current limit behaviors
The UCS1001 provides a USB port power switch for
precise control of up to 2.5 amperes continuous current
with over-current limit (OCL), dynamic thermal
management, latch or auto-recovery (low test current)
fault handling, selectable active low or high enable,
under- and over-voltage lockout, back-drive protection,
and back-voltage protection.
—
—
—
—
—
—
—
—
—
—
—
2.9 V to 5.5 V source voltage range
Up to 2.5 A current with 55 mΩ On Resistance
Over-current trip or constant current limiting
Soft turn-on circuitry
Selectable current limit
Dynamic thermal management
Under- and over-voltage lockout
Back-drive, back-voltage protection
Latch or auto-recovery (low test current) fault handling
Selectable active high or low power switch enable
BC1.2 VBUS discharge port renegotiation function
Split supply support for VS and VDD is an option for low
power in system standby states. This gives battery
operated applications, like notebook PCs, the ability to
detect attachments from a sleep or off state. After the
Attach Detection is flagged, the system can decide to
wake up and/or provide charging.
Selectable / automatic cycling of USB data line
charger emulation profiles
—
Employs unique method and system for sampling
multiple profiles*
In addition to power switching and current limiting
modes, the UCS1001 will automatically charge a wide
variety of portable devices, including USB-IF BC1.2,
YD/T-1591 (2009), most Apple® and RIM®, and many
others. Nine preloaded charger emulation profiles
maximize compatibility coverage of peripheral devices.
—
UCS1001-3 and UCS1001-4 supports 12W charger
emulation
—
—
Allows for active cables
USB-IF BC1.2 charging downstream port (CDP) &
dedicated charging port (DCP) modes, YD/T-1591, and
most Apple and RIM protocols standard
USB 2.0 compliant high-speed data switch (in Pass-
through and CDP modes)
—
—
The UCS1001 is available in a 20-pin QFN 4 mm x
4 mm package.
Nine preloaded charger emulation profiles for maximum
compatibility coverage of peripheral devices
Applications
Charging Active (UCS1001-3) or Attach Detection
(UCS1001-4) open-drain output
Notebook and Netbook Computers
Tablets and E-book readers
Desktops and Monitors
Ultra low power Sleep state
Optional split supply support for VBUS and VDD for
low power in system standby states
Docking Stations and Printers
AC-DC wall adapters
Wake on Attach USB (UCS1001-4)
Wide operating temperature range: -40 °C to +85 °C
IEC61000-4-2 8 / 15 kV ESD immunity
UL recognized and EN/IEC 60950-1 (CB) certified
* Unique technology covered under the following US patents pending: 13/109,446; 13/149,529; 13/173,287; 13/233,949; 13/157,282;
12/978,371; 13/232,965.
SMSC UCS1001
Revision 1.4 (07-16-13)
DATASHEET