UCC23513-Q1
SLUSDT9A – AUGUST 2020 – REVISEDUDCECCE2M3B5E1R32-Q0210
SLUSDT9A – AUGUST 2020 – REVISED DECEMBER 2020
www.ti.com
UCC23513-Q1 4-A Source, 5-A Sink, 5.7-kVRMS Reinforced, Opto-Compatible,
Single-Channel Isolated Gate Driver
1 Features
3 Description
•
•
AEC-Q100 qualified for automotive applications
5.7-kVRMS single channel isolated gate driver with
opto-compatible input
Pin-to-pin, drop in upgrade for opto isolated gate
drivers
4.5-A source / 5.3-A sink, peak output current
Maximum 33-V output driver supply voltage
8-V (B) or 12-V VCC UVLO Options
Rail-to-rail output
105-ns (maximum) propagation delay
25-ns (maximum) part-to-part delay matching
35-ns (maximum) pulse width distortion
150-kV/μs (minimum) common-mode transient
immunity (CMTI)
The UCC23513-Q1 driver are opto-compatible, single-
channel, isolated gate drivers for IGBTs, MOSFETs
and SiC MOSFETs, with 4.5-A source and 5.3-A sink
peak output current and 5.7-kVRMS isolation rating.
The high supply voltage range of 33-V allows the use
of bipolar supplies to effectively drive IGBTs and SiC
power FETs. UCC23513-Q1 can drive both low side
and high side power FETs and bring significant
performance and reliability upgrades over opto-
coupler based gate drivers while maintaining pin-to-
pin compatibility in both schematic and layout design.
Performance highlights include high common mode
transient immunity (CMTI), low propagation delay, and
small pulse width distortion. Tight process control
results in small part-to-part skew. The input stage is
an emulated diode (e-diode) which means long term
reliability and excellent aging characteristics
compared to traditional LEDs found in optocoupler
gate drivers. High performance and reliability makes
them ideal for use in automotivemotor drives such as
the traction inverter, on-board chargers, DC charging
stations, and automotive HVAC and heating systems.
The higher operating temperature opens up
opportunities for applications not supported by
traditional optocouplers.
•
•
•
•
•
•
•
•
•
•
•
Isolation barrier life >50 Years
13-V reverse polarity voltage handling capability
on input stage supporting interlock
Stretched SO-6 package with >8.5-mm creepage
and clearance
Operating junction temperature, TJ: –40°C to
+150°C
Safety-related certifications:
– 8000-VPK reinforced isolation per DIN V VDE
V0884-11: 2017-01 (Planned)
•
•
•
Device Information (1)
– 5.7-kVRMS isolation for 1 minute per UL 1577
– CQC certification per GB4943.1-2011 (Planned)
BODY SIZE
(NOM)
PART NUMBER
UCC23513-Q1
PACKAGE
2 Applications
Stretched SO-6
7.5 mm x 4.68 mm
•
•
•
•
•
Traction Inverter for EVs
On-board charger and DC charging station
HVAC
Heaters
Industrial motor-control drives
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VCC
1
2
3
6
5
4
ANODE
UVLO
e
NC
VOUT
VEE
CATHODE
Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
without notice.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1