UCC21732-Q1
SLUSD7U7 C– ACU2G1U7S3T22-Q0210
SLUSD77 – AUGUST 2020
www.ti.com
UCC21732 10-A Source/Sink Reinforced Isolated Single Channel Gate Driver
for SiC/IGBT with Active Protection, Isolated Analog Sensing and High-CMTI
1 Features
3 Description
•
•
•
•
•
•
•
•
5.7-kVRMS single channel isolated gate driver
SiC MOSFETs and IGBTs up to 2121Vpk
33-V maximum output drive voltage (VDD-VEE)
±10-A drive strength and split output
150-V/ns minimum CMTI
270-ns response time fast overcurrent protection
Internal 2-level turn-off when fault happens
Isolated analog sensor with PWM output for
– Temperature sensing with NTC, PTC or thermal
diode
– High voltage DC-Link or phase voltage
Alarm FLT on over current and reset from RST/EN
Fast enable/disable response on RST/EN
Reject <40-ns noise transient and pulse on input
pins
12-V VDD UVLO with power good on RDY
– VDD UVLO 12 V
Inputs/outputs with over/under-shoot transient
voltage Immunity up to 5 V
130-ns (maximum) propagation delay and 30-ns
(maximum) pulse/part skew
SOIC-16 DW package with creepage and
clearance distance > 8 mm
The UCC21732 is a galvanic isolated single channel
gate driver designed for SiC MOSFETs and IGBTs up
to 2121-V DC operating voltage with advanced
protection features, best-in-class dynamic
performance and robustness. UCC21732 has up to
±10-A peak source and sink current.
The input side is isolated from the output side with
SiO2 capacitive isolation technology, supporting up to
1.5-kVRMS working voltage, 12.8-kVPK surge immunity
with longer than 40 years Isolation barrier life, as well
as providing low part-to-part skew , >150V/ns
common mode noise immunity (CMTI).
•
•
•
The UCC21732 includes the state-of-art protection
features, such as fast overcurrent and short circuit
detection, shunt current sensing support, fault
reporting, active miller clamp, input and output side
power supply UVLO to optimize SiC and IGBT
switching behavior and robustness. The isolated
analog to PWM sensor can be utilized for easier
temperature or voltage sensing, further increasing the
drivers' versatility and simplifying the system design
effort, size and cost.
•
•
•
•
•
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
Operating junction temperature –40°C to 150°C
UCC21732
DW SOIC-16
10.3 mm × 7.5 mm
2 Applications
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
•
•
•
•
•
Traction inverter for EVs
On-board charger and charging pile
DC/DC Converter for HEV/EVs
Industrial motor drives
Server, telecom, and industrial power supplies
Uninterruptible power supplies (UPS)
Device Pin Configuration
APWM
VCC
RST/EN
FLT
AIN
OC
1
2
3
4
5
6
7
8
16
15
COM
OUTH
VDD
14
13
12
11
10
9
RDY
INÅ
OUTL
CLMPE
VEE
IN+
GND
Not to scale
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1