UCC21540, UCC21540A, UCC21541, UCC21542
UCC21540, UCC21540A, UCC21541, UCC21542
www.ti.com
SLUSDE1D – NOVEMBER 2018 – REVISED FEBRUARY 2021
SLUSDE1D – NOVEMBER 2018 – REVISED FEBRUARY 2021
UCC2154x Reinforced Isolation Dual-Channel Gate Driver
With 3.3-mm Channel-to-Channel Spacing Option
1 Features
3 Description
•
Wide body package options
The UCC2154x is an isolated dual channel gate driver
family designed with up to 4-A/6-A peak source/sink
current to drive power MOSFET, IGBT, and GaN
transistors. UCC2154x in DWK package also offers
3.3-mm minimum channel-to-channel spacing which
facilitates higher bus voltage.
– DW SOIC-16: pin-2-pin to UCC21520
– DWK SOIC-14: 3.3 mm Ch-2-Ch spacing
Up to 4-A peak source and 6-A peak sink output
Up to 18-V VDD output drive supply
– 5-V and 8-V VDD UVLO Options
CMTI greater than 100 V/ns
•
•
The UCC2154x family can be configured as two low-
side drivers, two high-side drivers, or a half-bridge
driver. The input side is isolated from the two output
drivers by a 5.7-kVRMS isolation barrier, with a
minimum of 100-V/ns common-mode transient
immunity (CMTI).
•
•
Switching parameters:
– 40-ns maximum propagation delay
– 5-ns maximum delay matching
– 5.5-ns maximum pulse-width distortion
– 35-µs maximum VDD power-up delay
Resistor-programmable dead time
TTL and CMOS compatible inputs
Safety-related certifications:
– 8000-VPK reinforced isolation per DIN V VDE V
0884-11:2017-01
– 5700-VRMS isolation for 1 minute per UL 1577
– CQC certification per GB4943.1-2011
Protection features include: resistor programmable
dead time, disable feature to shut down both outputs
simultaneously, integrated de-glitch filter that rejects
input transients shorter than 5ns, and negative
voltage handling for up to –2V spikes for 200ns on
input and output pins. All supplies have UVLO
protection.
•
•
•
Device Information (1)
Rec. VDD
Supply Min.
2 Applications
PART NUMBER
IPK
PACKAGE
•
•
•
•
Isolated AC-to-DC and DC-to-DC power supplies
Server, telecom, IT and industrial infrastructures
Motor drives and solar inverters
UCC21540DW
4.0-A/6.0-A
4.0-A/6.0-A
1.5-A/2.5-A
4.0-A/6.0-A
4.0-A/6.0-A
9.2-V
SOIC (16)
SOIC (14)
SOIC (16)
SOIC (14)
SOIC (14)
UCC21540ADWK
UCC21541DW
6.0-V
9.2-V
Industrial transportation
UCC21542DWK
UCC21542ADWK
9.2-V
6.0-V
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VDD
VCC
RBOOT
HV DC-Link
VCC
VDDA
ROFF
INA
16
PWM-A
1
2
3
4
5
6
8
RIN
RON
OUTA
VSSA
CIN
INB
VCCI
GND
DIS
15
14
PWM-B
RGS
CBOOT
CIN
ꢀC
CVCC
SW
Functional
Isolation
VDD
DIS
VDDB
I/O
ROFF
RON
11
10
9
RDIS
CDIS
DT
OUTB
VSSB
RGS
VCCI
CVDD
RDT
CDT
≥2.2nF
VSS
Copyright © 2020, Texas Instruments Incorporated
Typical Application
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1