Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
UCC21320-Q1
SLUSDU7 –MARCH 2020
UCC21320-Q1 4-A, 6-A, 3.75-kV Isolated Dual-Channel Gate Driver
RMS
for Automotive
1 Features
3 Description
The UCC21320-Q1 is an isolated dual-channel gate
drivers with 4-A source and 6-A sink peak current. It
is designed to drive power MOSFETs, IGBTs, and
SiC MOSFETs up to 5-MHz with best-in-class
propagation delay and pulse-width distortion.
1
•
4-A peak source, 6-A peak sink output
•
3-V to 18-V input VCCI range to interface with
both digital and analog controllers
•
•
Up to 25-V VDD output drive supply
Switching parameters:
The input side is isolated from the two output drivers
by a 3.75-kVRMS basic isolation barrier, with a
minimum of 100-V/ns common-mode transient
immunity (CMTI). Internal functional isolation between
the two secondary-side drivers allows a working
–
–
–
–
19-ns typical propagation delay
10-ns minimum pulse width
5-ns maximum delay matching
6-ns maximum pulse-width distortion
voltage of up to 1500 VDC
.
•
•
Common-mode transient immunity (CMTI) greater
than 100 V/ns
Every driver can be configured as two low-side
drivers, two high-side drivers, or a half-bridge driver
with programmable dead time (DT). A disable pin
shuts down both outputs simultaneously, and allows
normal operation when left open or grounded. As a
fail-safe measure, primary-side logic failures force
both outputs low.
Universal: dual low-side, dual high-side or half-
bridge driver
•
•
Programmable overlap and dead time
Wide Body SOIC-14 (DWK) Package
–
3.3mm spacing between driver channels
Each device accepts VDD supply voltages up to 25
V. A wide input VCCI range from 3 V to 18 V makes
the driver suitable for interfacing with both analog and
digital controllers. All supply voltage pins have under
voltage lock-out (UVLO) protection.
•
•
•
•
•
Operating temperature range –40 to +125°C
Surge immunity up to 12.8 kV
Isolation barrier life >40 years
TTL and CMOS compatible inputs
With all these advanced features, the UCC21320-Q1
enables high efficiency, high power density, and
robustness.
Rejects input pulses and noise transients shorter
than 5 ns
•
•
•
Fast disable for power sequencing
Device Information(1)
Qualified for automotive applications
AEC-Q100 qualified with the following results
PART NUMBER
PACKAGE
BODY SIZE (NOM)
UCC21320DWK-Q1
DWK SOIC (14)
10.30 mm × 7.50 mm
–
–
–
Device temperature grade 1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Device HBM ESD classification level H2
Device CDM ESD classification level C6
Functional Block Diagram
2 Applications
VCCI 3,8
16 VDDA
15 OUTA
14 VSSA
•
•
HEV and BEV battery chargers
Driver
DEMOD UVLO
MOD
Isolated converters in DC-DC and AC-DC power
supplies
INA
DIS
NC
DT
1
5
7
6
•
•
Motor drive and DC-to-AC solar inverters
Uninterruptible power supply (UPS)
Disable,
UVLO
Functional Isolation
and
Deadtime
11 VDDB
10 OUTB
Driver
INB
2
4
MOD
DEMOD UVLO
GND
9
VSSB
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.