Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
UCC21225A
SLUSCV6A –APRIL 2017–REVISED FEBRUARY 2018
UCC21225A 4-A, 6-A, 2.5-kV Isolated Dual-Channel Gate Driver in LGA
RMS
1 Features
3 Description
The UCC21225A is an isolated dual-channel gate
driver with 4-A source and 6-A sink peak current in a
5-mm x 5-mm LGA-13 package. It is designed to
drive power transistors up to 5-MHz with best-in-class
propagation delay and pulse-width distortion.
1
•
Universal: Dual Low-Side, Dual High-Side or Half-
Bridge Driver
•
•
5 x 5 mm, Space-Saving LGA-13 Package
Switching Parameters:
–
–
–
19-ns Typical Propagation Delay
5-ns Maximum Delay Matching
6-ns Maximum Pulse-Width Distortion
The input side is isolated from the two output drivers
by
a 2.5-kVRMS isolation barrier, with 100-V/ns
minimum common-mode transient immunity (CMTI).
Internal functional isolation between the two
secondary side drivers allows working voltage up to
•
•
•
•
•
•
•
•
•
CMTI Greater than 100-V/ns
4-A Peak Source, 6-A Peak Sink Output
TTL and CMOS Compatible Inputs
3-V to 18-V Input VCCI Range
700-VDC
.
This driver can be configured as two low-side, two
high-side, or a half-bridge driver with programmable
dead time (DT). A disable pin shuts down both
outputs simultaneously when it is set high, and allows
normal operation when left open or grounded.
Up to 25-V VDD with 5-V UVLO
Programmable Overlap and Dead Time
Rejects Input Transients Shorter than 5-ns
Fast Disable for Power Sequencing
Safety-Related Certifications:
The device accepts VDD supply voltages up to 25-V.
A wide input VCCI range from 3-V to 18-V makes the
driver suitable for interfacing with both analog and
digital controllers. All the supply voltage pins have
under voltage lock-out (UVLO) protection.
–
3535-VPK Isolation per DIN V VDE V 0884-
11:2017-01
With all these advanced features, the UCC21225A
enables high power density, high efficiency, and
robustness in a wide variety of power applications.
–
–
2500-VRMS Isolation for 1 Minute per UL 1577
CQC per GB4943.1-2011 (Planned)
2 Applications
Device Information(1)
•
•
•
•
Server, Telecom, IT and Industrial Infrastructures
DC-DC and AC-to-DC Power Supplies
Motor Drive and DC-to-AC Solar Inverters
HEV and BEV Battery Chargers
PART NUMBER
PACKAGE
BODY SIZE (NOM)
UCC21225ANPL
NPL LGA (13)
5 mm x 5 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Functional Block Diagram
VCCI 4,7
13 VDDA
Driver
MOD
DEMOD UVLO
12 OUTA
INA
DIS
2
5
11 VSSA
Disable,
UVLO
and
Functional Isolation
Deadtime
DT
6
10 VDDB
Driver
INB
3
1
MOD
DEMOD UVLO
9
8
OUTB
VSSB
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.