UCC1580-1,-2,-3,-4
UCC2580-1,-2,-3,-4
UCC3580-1,-2,-3,-4
Single Ended Active Clamp/Reset PWM
FEATURES
DESCRIPTION
• Provides Auxiliary Switch Activation
Complementary to Main Power
Switch Drive
The UCC3580 family of PWM controllers is designed to implement a variety
of active clamp/reset and synchronous rectifier switching converter topolo-
gies. While containing all the necessary functions for fixed frequency, high
performance pulse width modulation, the additional feature of this design is
the inclusion of an auxiliary switch driver which complements the main
power switch, and with a programmable deadtime or delay between each
transition. The active clamp/reset technique allows operation of single
ended converters beyond 50% duty cycle while reducing voltage stresses
on the switches, and allows a greater flux swing for the power transformer.
This approach also allows a reduction in switching losses by recovering en-
ergy stored in parasitic elements such as leakage inductance and switch
capacitance.
• Programmable deadtime (Turn-on
Delay) Between Activation of Each
Switch
• Voltage Mode Control with
Feedforward Operation
• Programmable Limits for Both
Transformer Volt- Second Product
and PWM Duty Cycle
The oscillator is programmed with two resistors and a capacitor to set
switching frequency and maximum duty cycle. A separate synchronized
ramp provides a voltage feedforward pulse width modulation and a pro-
grammed maximum volt-second limit. The generated clock from the oscilla-
tor contains both frequency and maximum duty cycle information.
• High Current Gate Driver for Both
Main and Auxiliary Outputs
• Multiple Protection Features with
Latched Shutdown and Soft Restart
• Low Supply Current (100µA Startup,
1.5mA Operation)
(continued)
BLOCK DIAGRAM
UDG-95069-2
Pin Numbers refer to DIL-16 and SOIC-16 packages
SLUS292 - FEBRUARY 1999
Powered by ICminer.com Electronic-Library Service CopyRight 2003