UC3730

更新时间： 2024-11-16 22:41:47

品牌	Logo	应用领域
德州仪器 - TI		监控
页数	文件大小	规格书
5页	287K
描述
Thermal Monitor

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

UC3730 数据手册

UC1730

UC2730

UC3730

Thermal Monitor

FEATURES

DESCRIPTION

•

On-Chip Temperature Transducer

The UC1730 family of integrated circuit devices are designed to be used in

a number of thermal monitoring applications. Each IC combines a tempera-

ture transducer, precision reference, and temperature comparator allowing

the device to respond with a logic output if temperatures exceed a user pro-

grammed level. The reference on these devices is capable of supplying in

excess of 250mA of output current − by setting a level of power dissipation

the rise in die temperature will vary with airflow past the package, allowing

the IC to respond to airflow conditions

•

Temperature Comparator Gives

Threshold Temperature Alarm

•

Power Reference Permits Airflow

Diagnostics

Precision 2.5V Power Reference

Permits Airflow Diagnostics

These devices come in an 8-Pin DIP, plastic or ceramic, a 5-Pin TO-220 or a

PLCC-20 version. In the 8-Pin version, a PTAT (proportional to absolute

temperature) output reports die temperature directly. This output is config-

ured such that its output level can be easily scaled up with two external gain

resistors. A second PTAT source is internally referenced to the temperature

comparator. The other input to this comparator can then be externally pro-

grammed to set a temperature threshold. When this temperature threshold

is exceeded an alarm delay output is activated. Following the activation of

the delay output, a separate open collector output is turned on. The delay

pin can be programmed with an external RC to provide a time separation

between activation of the delay pin and the alarm pin, permitting shutdown

diagnostics in applications where the open collector outputs of multiple parts

are wire OR’ed together.

Transducer Output is Easily Scaled

for Increased Sensitivity

Low 2.5mA Quiescent Current

The 5-Pin version in the TO-220 package is well suited for monitoring

heatsink temperatures. Enhanced airflow sensitivities can be obtained with

this package by mounting the device to a small heatsink in the airstream.

This version of the device does not include the PTAT output or the open col-

lector alarm output.

BLOCK DIAGRAM

Pin numbers shown for 8-Pin DIP, ( ) number for 5-Pin TO-220.

10/94

12 3 4 5

中文翻译

下载PDF

与UC3730相关器件

型号	品牌	获取价格	描述	数据表
UC3730J	ETC	获取价格	Industrial Control IC
UC3730N	TI	获取价格	Thermal Monitor 8-PDIP 0 to 70
UC3730Q	TI	获取价格	Thermal Monitor 20-PLCC 0 to 70
UC3730QTR	TI	获取价格	Thermal Monitor 20-PLCC
UC3730T	TI	获取价格	Thermal Monitor 5-TO-220 0 to 70
UC3750	UTC	获取价格	600kHZ PWM/PFM STEP-DOWN DC-DC CONTROLLER
UC3750_11	UTC	获取价格	600kHZ PWM/PFM STEP-DOWN DC-DC CONTROLLER
UC3750G-XX-AF5-R	UTC	获取价格	600kHZ PWM/PFM STEP-DOWN DC-DC CONTROLLER
UC3750L-XX-AF5-R	UTC	获取价格	600kHZ PWM/PFM STEP-DOWN DC-DC CONTROLLER
UC3770	TI	获取价格	High Performance Stepper Motor Drive Circuit