UC1854N

更新时间： 2024-11-25 22:41:51

品牌	Logo	应用领域
德州仪器 - TI		稳压器开关式稳压器或控制器电源电路开关式控制器光电二极管
页数	文件大小	规格书
9页	283K
描述
High Power Factor Preregulator

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

UC1854N 技术参数

生命周期：	Obsolete	零件包装代码：	DIP
包装说明：	PLASTIC, DIP-16	针数：	16
Reach Compliance Code：	unknown	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.18
Is Samacsys：	N	模拟集成电路 - 其他类型：	POWER FACTOR CONTROLLER
控制模式：	CURRENT-MODE	控制技术：	PULSE WIDTH MODULATION
最大输入电压：	35 V	最小输入电压：	15 V
标称输入电压：	18 V	JESD-30 代码：	R-PDIP-T16
长度：	19.3 mm	功能数量：	1
端子数量：	16	最高工作温度：	125 °C
最低工作温度：	-55 °C	最大输出电流：	0.5 A
封装主体材料：	PLASTIC/EPOXY	封装代码：	DIP
封装形状：	RECTANGULAR	封装形式：	IN-LINE
认证状态：	Not Qualified	座面最大高度：	5.33 mm
表面贴装：	NO	切换器配置：	BOOST
最大切换频率：	200 kHz	温度等级：	MILITARY
端子形式：	THROUGH-HOLE	端子节距：	2.54 mm
端子位置：	DUAL	宽度：	7.62 mm
Base Number Matches：	1

UC1854N 数据手册

UC1854

UC2854

UC3854

High Power Factor Preregulator

FEATURES

DESCRIPTION

•

Control Boost PWM to 0.99 Power Factor

The UC1854 provides active power factor correction for power sys-

tems that otherwise would draw non-sinusoidal current from sinusoi-

dal power lines. This device implements all the control functions

necessary to build a power supply capable of optimally using available

power-line current while minimizing line-current distortion. To do this,

the UC1854 contains a voltage amplifier, an analog multiplier/divider,

a current amplifier, and a fixed-frequency PWM. In addition, the

UC1854 contains a power MOSFET compatible gate driver, 7.5V ref-

erence, line anticipator, load-enable comparator, low-supply detector,

and over-current comparator.

Limit Line Current Distortion To <5%

World-Wide Operation Without Switches

Feed-Forward Line Regulation

Average Current-Mode Control

Low Noise Sensitivity

Low Start-Up Supply Current

Fixed-Frequency PWM Drive

Low-Offset Analog Multiplier/Divider

1A Totem-Pole Gate Driver

The UC1854 uses average current-mode control to accomplish fixed-

frequency current control with stability and low distortion. Unlike peak

current-mode, average current control accurately maintains sinusoidal

line current without slope compensation and with minimal response to

noise transients.

The UC1854’s high reference voltage and high oscillator amplitude

minimize noise sensitivity while fast PWM elements permit chopping

frequencies above 200kHz. The UC1854 can be used in single and

three phase systems with line voltages that vary from 75 to 275 volts

and line frequencies across the 50Hz to 400Hz range. To reduce the

burden on the circuitry that supplies power to this device, the UC1854

features low starting supply current.

Precision Voltage Reference

These devices are available packaged in 16-pin plastic and ceramic

dual in-line packages, and a variety of surface-mount packages.

BLOCK DIAGRAM

UDG-92055

6/98

12 3 4 5 6 7...9

中文翻译

下载PDF

与UC1854N相关器件

型号	品牌	获取价格	描述	数据表
UC1854Q	TI	获取价格	High Power Factor Preregulator
UC1854QTR	ETC	获取价格	Power Factor Controller
UC1855	TI	获取价格	High Performance Power Factor Preregulator
UC1855A	TI	获取价格	High Performance Power Factor Preregulator
UC1855ADW	TI	获取价格	暂无描述
UC1855AJ	TI	获取价格	High Performance Power Factor Preregulator 20-CDIP -55 to 125
UC1855AL	ETC	获取价格	Power Factor Controller
UC1855AQ	TI	获取价格	暂无描述
UC1855B	TI	获取价格	High Performance Power Factor Preregulator
UC1855BJ	ROCHESTER	获取价格	1.5A POWER FACTOR CONTROLLER, 500kHz SWITCHING FREQ-MAX, CDIP16, CERAMIC, DIP-16

与UC1854N相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

45
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

34
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

62
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

59

产品中心

服务支持

精选活动

关于我们

帮助中心

UC1854N

UC1854N 技术参数

UC1854N 数据手册

与UC1854N相关器件

与UC1854N相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

UC1854N

UC1854N 技术参数

UC1854N 数据手册

与UC1854N相关器件

与UC1854N相关文章

您还可以找

您在本页遇到什么问题？