UC1709, UC2709, UC3709
DUAL HIGH-SPEED FET DRIVER
SLUS196C -- NOVEMBER 1996 -- REVISED FEBRUARY 2008
D
D
D
D
D
D
1.5 Amp Source/Sink Drive
Pin Compatible with 0026 Products
40 ns Rise and Fall into 1000pF
Low Quiescent Current
simplified schematic (only one driver shown)
V
CC
5 V to 40 V Operation
Thermal Protection
5 VOLT
REGULATOR
THERMAL
SENSE
description
The UC3709 family of power drivers is an
effective low-cost solution to the problem of
providing fast turn-on and off for the
capacitive gates of power MOSFETs. Made
with a high-speed Schottky process, these
devices will provide up to 1.5 A of either
source or sink current from a totem--pole
output stage configured for minimal
cross-conduction current spike.
INPUT
A OR B
6 k
INPUT
A OR B
5.6 V
The UC3709 is pin compatible with the
MMH0026 or DS0026, and while the delay
times are longer, the supply current is much
less than these older devices.
GND
UDG--00068
With inverting logic, these units feature complete TTL compatibility at the inputs with an output stage that can
swing over 30 V. This design also includes thermal shutdown protection.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†}
Parameter
DW PACKAGE
J PACKAGE
L PACKAGE
N PACKAGE
UNIT
Supply Voltage, V
40
40
40
40
V
CC
Output Current (Source or Sink)
. . . . . . . . Steady--State
±500
±500
±500
±500
mA
A
. . . . . . . . Peak Transient
. . . . . . . . Capacitive Discharge Energy
Digital Inputs}
±1.5
±1.0
±1.0
±1.5
20
15
15
20
mJ
V
5.5
5.5
5.5
5.5
Power Dissipation at T = 25°C
1
3
1
2
1
2
1
3
W
A
Power Dissipation at T = 25°C
W
C
Operating Junction Temperature Range (T )
--55 to 125
--65 to 150
300
--55 to 125
--65 to 150
300
--55 to 125
--65 to 150
300
--55 to 125
--65 to 150
300
°C
°C
°C
J
Storage Temperature Range
Lead Temperature (Soldering, 10 Seconds)
†
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All currents are positive into and negative out of the specified terminals. Digital drive can exceed 5.5V if input is limited to 10mA. Consult the
Packaging Section of the Databook for thermal limitations and considerations of the package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2004 -- 2008, Texas Instruments Incorporated
1
www.ti.com