ALUMINUM ELECTROLYTIC CAPACITORS
Wide Temperature Range, Miniature Type Permissible
Abnormal Voltage
UAS
UAQ
Improved safety feature for abnormally excessive voltage.
High ripple current product.
Smaller
Compliant to the RoHS directive (2011/65/EU).
UAS
Specifications
Performance Characteristics
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
–40 to +105°C
200V, 400V
4.7 to 330µF
20% at 120Hz, 20°C
After 1 minute's application of rated voltage at 20°C, leakage current is 0.04CV+100 (µA) or less.
Rated voltage (V)
200
0.15
400
0.15
Measurement frequency:120Hz at 20°C
Tangent of loss angle (tan δ)
tan δ (MAX.)
Rated voltage (V)
200
3
6
400
8
10
Measurement frequency : 120Hz
Stability at Low Temperature
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Impedance ratio ZT / Z20 (MAX.)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 2000 hours at 105°C, the peak
voltage shall not exceed the rated voltage.
Capacitance change
tan δ
Within 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Endurance
Shelf Life
Leakage current
After leaving capacitors under no load at 105°C for 1000 hours they shall meet the specified values for the endurance characteristics listed above.
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case.
Test conditions
voltage (V)
Safety Performance
Limited DC current
4A (5A : 330µF)
2A (4A : 100µF or more)
Test Voltage
200
400
300VDC and 375VDC
500VDC and 600VDC
Marking
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Type numbering system (Example : 200V 220 F)
µ
Sleeve (P.E.T.%
φ d
1
2
3
4
5
6
7
8
9 10 11 12
U A S 2 D 2 2 1 M H D
Size code
Configuration
Capacitance tolerance ( 20ꢀ%
Rated capacitance (220µF%
Rated voltage (200V%
Series name
MIN
MIN
4
+2.0MAX.
15
L
(mm%
18
Pressure
relief vent
φD 10 12.5 16
P
5.0 5.0 7.5 7.5
Type
φd 0.6
0.8 0.8
0.6
Configuration
In case L>25 for φ12.5 (D% case sizes,
lead diameter φ0.8 (d% will be applied.
Pb-free leadwire
φ D
Pb-free PET sleeve
• Please refer to page 20 about the end
10
PD
HD
seal configuration.
12.5 to 18
Dimensions
200 (2D)
400 (2G)
V
φD
φ
φ
φ
φ
φ
φ
φ
φ
Cap.(µF)
4.7
22
10
12.5
16
18
10
12.5
16
18
4R7
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
10 × 9
60
12.5 × 20
12.5 × 25
165
200
27
33
39
47
56
68
82
100
120
150
180
220
270
330
10 × 20
10 × 25
160
195
16 × 20
16 × 25
16 × 25
16 × 31.5
16 × 35.5
16 × 40
225
255
290
340
385
435
18 × 20
18 × 20
18 × 25
18 × 25
18 × 31.5
18 × 35.5
18 × 40
255
280
320
360
430
490
540
12.5 × 20
12.5 × 20
12.5 × 25
12.5 × 25
195
210
320
360
12.5 × 31.5 430
16 × 20
16 × 25
430
460
600
18 × 20
18 × 25
18 × 31.5
18 × 35.5
18 × 40
460
600
710
890
910
16 × 31.5
Case size Rated
φ D×L (mm) ripple
Rated ripple current (mArms) at 105°C 120Hz
Frequency coefficient of rated ripple current
In case of low profile type
:
, 6 will be put at 12th digit of type numbering system.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
50, 60Hz 120Hz
0.80 1.00
300Hz
1.25
1kHz 10kHz or more
1.40 1.60
Frequency
Coefficient
268