ALUMINUM ELECTROLYTIC CAPACITORS
Wide Temperature Range, Permissible
Abnormal Voltage
UAQ
Improved safety feature for abnormally excessive voltage.
High ripple current product.
UAQ
Smaller
Compliant to the RoHS directive (2011/65/EU).
UAS
Specifications
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
–40 to +105°C
200 · 400V
10 to 220µF
20% at 120Hz, 20°C
µ
After 1 minute's application of rated voltage at 20°C, leakage current is 0.04CV+100 ( A) or less.
Rated voltage (V)
200
0.15
400
0.15
Measurement frequency:120Hz at 20°C
Tangent of loss angle (tan δ)
tan δ (MAX.)
Rated voltage (V)
Measurement frequency : 120Hz
200
3
6
400
8
10
Stability at Low Temperature
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Impedance ratio ZT / Z20 (MAX.)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 2000 hours at 105°C, the peak
voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Within 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Endurance
Shelf Life
Leakage current
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case.
Test conditions
voltage (V)
Limited DC current
Test Voltage
Safety Performance
200
400
4A
2A
300VDC and 375VDC
500VDC and 600VDC
Marking
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Type numbering system (Example : 200V 100 F)
µ
(
%
Sleeve P.E.T.
φd
1
2
3
4
5
6
7
8
9 10 11 12
U A Q 2 D 1 0 1 M H D
Size code
Configuration
Capacitance tolerance ( 20ꢀ%
Rated capacitance (100µF%
Rated voltage (200V%
Series name
(mm%
φD 10 12.5 16 18 22
0.5 0.5 0.5 0.5 1.0
Pressure
relief vent
+
MAX.
MIN
MIN
4
Type
L
15
P
5.0 5.0 7.5 7.5 10
Configuration
φd 0.6 0.8 0.8 1.0
0.6
Pb-free leadwire
φ D
In case L>25 for φ12.5 (D% case sizes,
lead diameter φ0.8 (d% will be applied.
Pb-free PET sleeve
• Please refer to page 20 about the end seal
10
12.5 to 18
22
PD
HD
RD
configuration.
(φD 18% 2.0
(φD >18% 3.0
Dimensions
V(Code)
200 (2D)
400 (2G)
φD
φ
φ
φ
16
φ
φ
φ
φ
16
φ
18
φ
22
Cap.(µF)
10
12.5
18
22
12.5
Code
12.5 × 20.0
100
12.5 × 31.5
145
12.5 × 40.0
195
010
100
10 × 20
120
10 × 25
160
0.10 × 31.5
195
16 × 20
145
16 × 25
195
0.16 × 35.5
280
0.16 × 35.5
320
022
033
047
056
068
082
100
150
180
220
220
330
470
560
680
820
101
151
181
221
18 × 20
195
18 × 25
280
12.5 × 20.0
160
12.5 × 20.0
195
12.5 × 25.0
210
12.5 × 25.0
250
12.5 × 31.5
285
12.5 × 35.5
335
22 × 20
280
22 × 25
320
18 × 31.5
320
18 × 35.5
350
16 × 40
350
18 × 40
420
16 × 20
285
16 × 25
335
0.16 × 31.5
435
0.16 × 35.5
495
18 × 20
335
18 × 25
435
18 × 31.5
495
0.18 × 35.5
575
22 × 20
435
22 × 25
495
Case size φ D×L (mm)
Rated ripple
Rated ripple current (mArms) at 105°C 120Hz
6 will be put at 12th digit of type numbering system.
:
:
In case of low profile type,
For further low profile product,
Frequency coefficient of rated ripple current
3
will be put at 12th digit.
50, 60Hz 120Hz
0.80 1.00
300Hz
1.25
1kHz 10kHz or more
1.40 1.60
Frequency
Coefficient
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
267