Count
Count
Chkd
Description of revisions
Chkd Date
Description of revisions
Date
By
By
△
△
△
△
Applicable standard
Operating
temperature range
Storage
temperature range
-30℃ ~ +70℃
-40℃ ~ + 90℃
---W
Characteristic
impedance
50Ω (0 to 8GHz)
Rating
Power
Applicable
cable
-
Peculiarity
---
SPECIFICATIONS
TEST METHOD
ITEM
CONSTRUCTION
General examination
REQUIREMENTS
QT AT
According to drawing.
Visually and by measufing instrument.
Confirmed visually.
O
O
O
O
Marking
ELECTRICAL CHARACTERISTICS
Contact resistance
Mate applicable connector and apply a current of
Center contact : 30 mΩ Max.
Outer contact : 30 mΩ Max.
10 mA AC(Or 10,000Hz).
O
-
Insulation resistance
Voltage proof
Mate applicable connector and apply a voltage of
DC 100 V.
500 MΩ Min.
O
O
-
-
Mate applicable and apply a voltage of
AC 200 V for 1 min.
No flashover or breakdown.
VSWR 1.6 Max.
Voltage standing wave ratio
(Note 2)
Frequency 0 to 8GHz.
O
-
MECHANICAL CHARACTERISTICS
Mechanical operation
30 times insertions and extractions.
① Contact resistance
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
-
② No damage, crack and looseness of parts.
980 m/s2 direction of pulse 6ms at 10 times
in 3 directions.
① No electrical discontinuity of 1㎲.
② Contact resistance
Shock
Center contact : 50 mΩ Max.
O
-
-
Outer contact : 50 mΩ Max.
③ No damage, crack and looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid change of temperature
Temperature : -40±2 → 15~35 → +90±2 → 15~35 ℃
Time : 30 30 → 5 min
Under 200 cycles.
Exposed at 25±2 ℃, 65 % 25 h.
① Contact resistance
(NOTE 1)
→
5
→
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
Damp heat, cycle
(NOTE 1)
② No damage, crack or looseness of parts.
③ Insulation resistance : 10 MΩ Min.
O
-
Under 10 cycles.
Drawn
Designed
Checked
Approved
Released
Remarks conditions for testing
ENG
H.G PARK H.G PARK
19.03.06 19.03.06
D.G KIM
H.S KIM
19.12.13
DEPT
19.03.06
19.03.06
Unless otherwise specified, refer to JIS C 5402.
Note QT: Qualification test AT: Assurance test O: Applicable test
Part No.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
U.FL-R-SMT-K(800)
CL 6327-0362-5-800
F-1-021(Rev.0)
Code No.(OLD)
Drawing No.
Code No.
1
2
ELC4-632635
CL