TWL6030
www.ti.com
SWCS045B –SEPTEMBER 2010–REVISED JUNE 2011
Fully Integrated Power Management with Switch Mode Charger
Check for Samples: TWL6030
•
Control
1
FEATURES
–
Configurable power-up and power-down
23
•
Seven highly efficient 6-MHz buck converters
sequences (EPROM programmable)
–
–
Two 0.6 to 2.1 V @ 1.6 A
Five 0.6 to 2.1 V @ 1.0 A
–
Three output signals that can be included
in the start-up sequence
•
11 General-purpose LDOs
–
–
Two I2C™ interfaces
–
Six 1.0 to 3.3 V @ 0.2 A with battery or
preregulated supply (One can be used as a
vibrator driver.)
All resources configurable by I2C
•
•
Clock management
32-kHz output
Battery charger 1.5 A
–
–
One 1.0 to 3.3 V @ 50 mA with battery or
preregulated supply
One low noise 1.0 to 3.3 V @ 50 mA with
battery or preregulated supply
–
–
–
Charger for single-cell Li-Ion and
Li-Polymer battery packs
Switched mode charger with integrated
power FET for up to 1.5-A current
High-accuracy voltage and current
regulation
–
–
–
3.3 V @ 35 mA USB LDO
One LDO for TWL6030 internal use
One LDO for internal and external use
•
•
•
•
USB OTG module
Backup battery charger
10-bit ADC with 17 input channels
13-bit Coulomb counter with four
programmable integration periods
Low power consumption
–
–
–
–
–
–
Safety timer and reset control
Thermal regulation protection
Input/output overvoltage protection
Charging indicator LED driver
Boost mode operation for USB OTG
Compliant with:
•
–
–
–
5 µA in backup mode
20 µA in wait-on mode
110 µA in deep sleep, with two DCDCs
–
–
–
–
–
USB 2.0
OTG and EH 2.0
YD/T 1591-2006
USB battery charging 1.1 and 1.2
Japanese battery charging requirements
active
•
•
•
•
RTC with alarm wake-up mechanism
SIM and MMC card detections
Two digital PWM outputs
•
Package 7 mm x 7 mm 187-pin nFBGA
Thermal monitoring
APPLICATIONS
–
–
High-temperature warning
Thermal shutdown
•
•
•
•
•
•
Mobile phones and smart phones
Gaming handsets
Portable media players
Portable navigation systems
Handheld devices
Tablets
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
SmartReflex is a trademark of Texas Instruments.
MIPI is a registered trademark of Mobil Industry Processor Interface.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated